Welcome to our new website, found an issue or bug? Please report it here
SAP-TC-Series
Adhesive Pad Thermocouple Sensor
Models In Stock
- Made of silicone rubber for excellent flexibility
- Self-adhesive thin backing to increase response time
- Attach directly to clean surface for accurate temperature measurement
- Made for one-time placement on surface via self-adhesive pad
SAP-TC-Series
From
$
49.08
Models In Stock
Product Overview
- Electrical Connection Stripped Leads
- Insulation PFA
- Pad Material Silicone
- Process Temperature, Max 200 °C
- Process Temperature, Min -50 °C
- Wire Gauge 24 AWG
Omega's SAP-Series thermocouples are designed for surface temperature measurements. These thermocouples are ideal for both flat and curved surfaces. The integral thermocouple sensor is bonded onto the inner surface of the exposed silicone material, providing faster temperature response. These are available in four different thermocouple types: J, K, T, and E. The temperature range is -50 to 200°C (-58 to 392°F). Applications include hot plate measurements, pipe measurements and these can be connected directly to instrument casings or motor housings to obtain an accurate temperature reading.
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
CharlesR from
Better than I expected
Works very well, fast and accurate measurement time and physically more rugged than I expected. Adhesive is good enough for temporary work which is what I needed.
Date published: 2023-12-11
Rated 5 out of
5
by
april from
Shipped quickly .easy to purchase and came correct
Shipped quickly . easy to purchase and came correct.
Date published: 2022-02-15
Can this be ordered with a NIST traceable calibration certificate?
Thank you for your inquiry. Yes it can be ordered with a NIST calibration certificate. Please send your quote request to sales@omega.com
Date published: 2023-02-14
Is this a resistive sensor? if yes, what is the resistance variation ?
Thank you for your inquiry gustavo53. Thermocouples are not resistive sensors. They don't output resistance but millivolts.
Date published: 2023-02-08
What is the adhesive material? Do you have more information on the Silicone blend used for the coating?
This information is not readily available and if required send a request for information to temp@dwyeromega.com for further research.
Date published: 2024-06-19
The TC connector sold on Omega SMPW-TI-M has a service rating of -29C. Will this connector work with SAPF-TI-2M TC? SAPF-TI-2M is rated to -50, what is a compatible connector?
The SMPW-TI-M will work as a connector for the probe to carry a signal through the full Type T temperature range. It cannot physically be used below the -29C rating due to the materials it is constructed with. The connecters are most often used in an ambient temperature where the instrument accepting the reading is located.
Date published: 2023-12-19