Welcome to our new website, found an issue or bug? Please report it here
S-HEATER
Iron or Chrome Steel Strip Heater Opposite End Terminals
Models In Stock
- 1½" Wide
- Rugged, Reliable, Premium Quality
- 150 to 2250 Watt
- U.L. Component Recognized and C.S.A. Certified
S-HEATER
From
$
95.59
Models In Stock
Product Overview
- Form factor Strip
- Height 0 in
- Number of Mounting Channels 2
- Termination 1 Terminal On Each End
OMEGALUX™ "S" series strip heaters are supplied with either a rust-resisting iron or chrome steel sheath to a width of 1½". Selecting the sheath material depends upon the process and environment that the heaters would be exposed to. The "S" series features one terminal on each end conforming in many applications. See Introduction Pages for additional strip heater application guidelines.
CAUTION AND WARNING
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.
/* Designate voltage, i.e.; insert 120 or 240 for voltage. Additional strip heater models available with other widths and configurations. Contact OMEGALUX 1-800-USA-HEAT.
To determine maximum allowable watt density, see Figures C-8 or C-9.
Not all combinations may be vaild in th "Part Number Builder".
Please review the spec sheet for all possible valid part numbers.
CAUTION AND WARNING
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.
| Dimensions—Inches (cm) | Rust-Resisting Iron Sheath | Chrome Steel Sheath | |||||||
| A | B | D | Watts | W/in2 | Model No. | Watts | W/in2 | Model No. | Wt. Lb (kg) |
| 8 (20) | 7 (18) | 6 1/2 (17) | 150 | 10 | S-815/* | 250 | 17 | S-802/* | .63 (.16) |
| 9 1/2 (24) | 8 1/2 (22) | 8 (20) | 200 | 10 | S-920/* | 300 | 15 | S-903/* | .75 (.34) |
| 12 (30) | 11 (28) | 10 1/2 (27) | 250 | 9 | S-1225/* | 250 | 9 | S-1202/* | .94 (.43) |
| 12 (30) | 11 (28 | 10 1/2 (27) | — | — | — | 500 | 17 | S-1205/* | .94 (.43) |
| 14 (36) | 13 (33) | 12 1/2 (32) | 300 | 8 | S-1430/* | 500 | 14 | S-1405/* | 1.06 (.48) |
| 15 1/4 (39) | 14 1/4 (36) | 13 3/4 (35) | 325 | 8 | S-1532/* | 500 | 12 | S-1505/* | 1.19 (.54) |
| 17 7/8 (45) | 16 7/8 (43) | 16 3/8 (42) | 375 | 8 | S-1837/* | 500 | 10 | S-1805/* | 1.44 (.65) |
| 17 7/8 (45) | 16 7/8 (43) | 16 3/8 (42) | 500 | 10 | S-1850/* | 750 | 15 | S-1807/* | 1.44 (.65) |
| 17 7/8 (45) | 16 7/8 (43) | 16 3/8 (42) | — | — | — | 1000 | 20 | S-1801/* | 1.44 (.65) |
| 19 1/2 (50) | 18 1/2 (47) | 18 (46) | 500 | 9 | S-1950/* | 500 | 9 | S-1905/* | 1.5 (.68) |
| 19 1/2 (50) | 18 1/2 (47) | 18 (46) | — | — | — | 750 | 13 | S-1907/* | 1.57 (.71) |
| 19 1/2 (50) | 18 1/2 (47) | 18 (46) | — | — | — | 1000 | 18 | S-1901/* | 1.57 (.71) |
| 21 (53) | 20 (51) | 19 1/2 (50) | 500 | 8 | S-2050/* | 500 | 9 | S-2005/* | 1.75 (.79) |
| 23 3/4 (60) | 22 3/4 (58) | 22 1/4 (57) | 250 | 4 | S-2425/* | 500 | 7 | S-2405/* | 1.88 (.85) |
| 23 3/4 (60) | 22 3/4 (58) | 22 1/4 (57) | 500 | 7 | S-2450/* | 750 | 10 | S-2407/* | 1.88 (.85) |
| 23 3/4 (60) | 22 3/4 (58) | 22 1/4 (57) | — | — | — | 1000 | 14 | S-2401/* | 1.88 (.85) |
| 23 3/4 (60) | 22 3/4 (58) | 22 1/4 (57) | — | — | — | 1500 | 21 | S-2415/* | 1.88 (.85) |
| 25 1/2 (65) | 24 1/2 (62) | 24 (61) | 750 | 10 | S-2575/* | 1000 | 12 | S-2501/* | 2.01 (.91) |
| 26 3/4 (68) | 25 3/4 (65) | 25 1/4 (64) | 700 | 8 | S-2670/* | 750 | 9 | S-2607/* | 2.13 (.97) |
| 30 1/2 (77) | 29 3/8 (75) | 28 (71) | 750 | 8 | S-3075/* | 750 | 8 | S-3007/* | 2.13 (.97) |
| 33 1/2 (85) | 32 3/8 (82) | 31 (79) | 750 | 7 | S-3375/* | 1000 | 10 | S-3301/* | 2.63 (1.2) |
| 35 7/8 (91) | 34 3/4 (88) | 33 3/8 (85) | 1000 | 7 | S-3610/* | 1000 | 9 | S-3601/* | 2.83 (1.3) |
| 38 1/2 (98) | 37 3/8 (95) | 36 (91) | 1000 | 8 | S-3810/* | 1000 | 8 | S-3801/* | 3.0 (1.4) |
| 42 1/2 (108) | 41 3/8 (105) | 40 (102) | 1250 | 9 | S-4312/* | 1000 | 11 | S-4301/* | 3.38 (1.5) |
To determine maximum allowable watt density, see Figures C-8 or C-9.
Not all combinations may be vaild in th "Part Number Builder".
Please review the spec sheet for all possible valid part numbers.
PDFs & Manuals
