Welcome to our new website, found an issue or bug? Please report it here
SRTD-1-SRTD-2
Cement-On Polyimide Fast Response RTD Surface Sensors
Models In Stock
- 36" Leads Standard
- Ideal for Surface Temperature Measurement
- Wire Wound 100 Ohm Pt RTD Element
- Response Time in Milliseconds
SRTD-1-SRTD-2
From
$
407.02
Models In Stock
Product Overview
- Bend Radius, Min 9.5 mm
- Cable Diameter 0.06 in
- Electrical Connection Stripped Leads
- Insulation PFA
- Insulation Resistance 50 MΩ
- Insulation Resistance Note 50 M Ω minimum at 50 Vdc ribbon cable. 100G Ohm minimum at 500 Vdc, round twisted cable (dry conditions at room temperature).
- Mounting DIN Platinum
- Nominal Resistance 100 Ω
- Process Temperature, Max 260 °C
- Process Temperature, Min -200 °C
- Response Time <200 ms
- Response Time Note <200 milliseconds lag on metal surfaces
- Self Heating Effect 0.33 °C / mW
- Sensor Height 0.64 mm
- Sensor Length 25 mm
- Sensor Width 15.7 mm
- Stability <0.2°C
- Stability Note <0.2°C drift per year at rated service and proper mounting
- Temperature Coefficient 0.00385Ω/Ω/°C
- Temperature Coefficient Note α=0.00385Ω/Ω/°C
- Temperature Sensor Type RTD
Models SRTD-1 and SRTD-2 are polyimide insulated surface mount RTD temperature sensors designed to provide a practical method for measuring surface temperatures. These sensors are small and flexible, and their low mass has minimal thermal effect on the material being measured. They are ideally suited for applications where the sensor can be mounted to the surface being measured using adhesives (OMEGABOND™ 101 and 200 epoxies can be used) or other mechanical mounting methods.
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Thesix Tech from
Good wuality
The product is described as it is and quality material
Date published: 2023-03-12
Is it possible to measure short term temperature above 300 degree for SRTD-1?
Yes. You will still get a reading although there is no guarantee that the temperature will be within the accuracy stated or be correct. We only certify to 260 C with this unit.
Date published: 2021-01-23
Which OmegaBond Epoxy is rated for use of this sensor for use at cryogenic temperatures (-200C)?
Thank you for your inquiry. Unfortunately none of our epoxies can withstand cryogenic temperatures.
Date published: 2021-03-22