Series-PFT

Paddlewheel Flowmeters for Liquid Monitoring, Brass/316 SS, 4-20 mA Output

(0)

Long product life even in applications with particulate due to bearings and shaft that offer excellent wear protection
Use in irrigation applications with weatherproof and submersible ratings
Save time and inventory with one unit that is adjustable over a large pipe size range
Application versatility with a variety of wetted material selections
Reduce need for additional external components with integral 4-20 mA output
Eliminate concerns regarding magnetic material in flow due to sensor technology, which uses inductive sensing and no magnets

See Product Overview

Series-PFT

From ^$ 723.50

Shop Models

9 Variations available

See all series options below

Data Sheet

Can't find the right model?

Use our custom configurator to fine tune your product

Product Overview

Compliance CE
Electrical Connection Cable
Enclosure Ratings IP67
Linear Flow Rate, Max 25 ft/s
Linear Flow Rate, Min 1.2 ft/s
Linearity ± 1.0%
Media Compatibility Water-based fluids
Operating Temperature, Max 212 °F
Operating Temperature, Min -40 °F
Power Consumption 40 mA
Pressure Limits Up to 400 psi
Pressure Limits Note (27.6 bar) @ 100°F (37.8°C), 325 psig (22.4 bar) @ 212°F (100°C).
Process Connection Size 1 1/2 in
Repeatability ± 0.5%
Supply Power Type DC
Supply Voltage 10 to 35 Vdc
Weight 3 lb
Wire Gauge 22 AWG

The Series PFT Insertion Paddlewheel Flowmeters are used to monitor liquid flow rates in pipes from 1-1/2 to 40" and is available in brass or 316 SS body. The unit outputs a frequency proportional pulsed or 4 to 20 mA output. The pulse models are a square wave output signal with frequency proportional to the flow velocity and the 4 to 20 mA models have a linear output of the velocity with 4 mA equal to 0 ft/s and 20 mA equal to 25 ft/s.

California Residents: Click Here for Proposition 65 WARNING.