Welcome to our new website, found an issue or bug? Please report it here
FPB1400-Series
Plastic Paddlewheel Flow Meters With Optional RTD Sensor
Models In Stock
- Easy to Install and Operate
- Mounts in Any Direction
- Only One Moving Part
- Visual Flow Indication
FPB1400-Series
From
$
653.06
Models In Stock
Product Overview
- Accuracy ± 1 %
- Approvals CE
- Electrical Output Amplified Square Pulse, NPN Open Collector
- Height 2.2 in
- Length 4.25 in
- Operating Pressure, Max 150 psi
- Operating Pressure, Min 0 psi
- Output Detail Amplified Square Pulse, NPN Open Collector (load 30 mA maximum)
- Pressure Drop Note Maximum Pressure Drop: 15 psi on size 2 units 20 psi on all other sizes
- Pressure Type Gauge
- Process Connection Type NPT Female
- Process Temperature, Max 60 °C
- Response Time 1 s
- Response Time Note At 1 sec 10 to 90% of full scale, at 2 sec below 10% of full scale
- Supply Current 2 mA
- Supply Power Note 5 to 24 Vdc @ 2 mA
- Supply Voltage 5 to 24 Vdc
- Viscosity Note Calibrated 1 cSt, up to 50 cSt with field calibration
- Viscosity Range 1 to 50 cSt
- Width 2.2 in
Fluid flowing through the FPB1400 causes the paddlewheel to spin. As the magnets embedded in the paddle spin past the sensor, electrical pulses are produced in which frequency is proportional to the flow rate. The number of pulses per desired time interval and the K-factor (number of pulses/gallon) make it is easy to calculate the flow rate and volume passing through the unit.
SPECIFICATIONS
Accuracy: ±1% FS
Max Temperature: 60°C (140°F)
Max Pressure: 10 bar (150 psig)
Power: 5 to 24 Vdc @ 2 mA
Output Signal: NPN open collector (load 30 mA max)
Body Dimensions: 56 H x 108 L x 53 mm D (2.2 x 4.25 x 2.2")
Cable: Flow 1.8 m (6'), RTD 0.3 m (1') (-RTD models)
RTD: Platinum 0.00385 TCR, meets EN 60751, Class B (-RTD models)
Max Pressure Drop: 15 psi on size 2 units 20 psi on all other sizes
Viscosity: Calibrated 1 cSt, up to 50 cSt with field calibration
Response Time: At 1 sec 10 to 90% of full scale, at 2 sec below 10% of full scale
Wetted Materials Polypropylene Models
Body: Polypropylene
LID: Acrylic
Paddlewheel: PVDF
Shaft: Nickel tungsten carbide
Bearings: Sapphire jewels
O-Rings: EPDM
RTD: 316 SS casing PVDF Models
Body: PVDF
LID: PVDF
Paddlewheel: PVDF
Shaft: Zirconia ceramic
Bearings: Sapphire jewels
O-Rings: PTFE
RTD: 316 SS casing (-RTD models)
SPECIFICATIONS
Accuracy: ±1% FS
Max Temperature: 60°C (140°F)
Max Pressure: 10 bar (150 psig)
Power: 5 to 24 Vdc @ 2 mA
Output Signal: NPN open collector (load 30 mA max)
Body Dimensions: 56 H x 108 L x 53 mm D (2.2 x 4.25 x 2.2")
Cable: Flow 1.8 m (6'), RTD 0.3 m (1') (-RTD models)
RTD: Platinum 0.00385 TCR, meets EN 60751, Class B (-RTD models)
Max Pressure Drop: 15 psi on size 2 units 20 psi on all other sizes
Viscosity: Calibrated 1 cSt, up to 50 cSt with field calibration
Response Time: At 1 sec 10 to 90% of full scale, at 2 sec below 10% of full scale
Wetted Materials Polypropylene Models
Body: Polypropylene
LID: Acrylic
Paddlewheel: PVDF
Shaft: Nickel tungsten carbide
Bearings: Sapphire jewels
O-Rings: EPDM
RTD: 316 SS casing PVDF Models
Body: PVDF
LID: PVDF
Paddlewheel: PVDF
Shaft: Zirconia ceramic
Bearings: Sapphire jewels
O-Rings: PTFE
RTD: 316 SS casing (-RTD models)
PDFs & Manuals
