Welcome to our new website, found an issue or bug? Please report it here
FMG71B
Electromagnetic Low Flow Meter
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 1.5 % |
| Accuracy Note | ± 1.5% of reading ± 0.3% range |
| Conductivity | 50 µS/cm |
| Current, Max | 26_ma_approx |
| Electrical Connection | M12 4 pin Female |
| Enclosure Ratings | IP65, NEMA Type 4X |
| Flange Diameter | 0.39 in |
| Flow Indication | LED Green |
| Flow Indication Note | flow proportional blinking |
| K-Factor | 3785 pulses/gal |
| Load Resistance | 250 Ω |
| Materials | PEEK, Aluminum |
| Materials, Wetted | EPDM, Stainless Steel |
| Media Compatibility | Acid Solutions, Conductive Liquids, Saltwater |
| Number of Outputs | 1 |
| Operating Pressure, Max | 232 psi |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | 5 °C |
| Output Detail | Amplified Square Wave |
| Output Pulse Rate Note | Square wave signal NPN, internal pull-up resistor 2 kΩ pulse duty ratio 50:50 |
| Output Signal | DC Pulse |
| Power Consumption | 150 mA |
| Process Connection Size | 1/2 in |
| Process Connection Type | NPT Male |
| Process Temperature, Max | 90 °C |
| Process Temperature, Min | 0 °C |
| Repeatability | ± 1% |
| Response Time | < 500 ms |
| Sensor Diameter | 0.25 in |
| Short-Circuit Protected | < 30 V |
| Short-Circuit Protected Note | Measures short-circuit proof (up to 30V) and polarity protection (up to -30V) |
| Supply Power Note | 24 Vdc ± 10% |
| Supply Power Type | DC |
| Supply Voltage | 24 Vdc |
| Volumetric Flow Rate, Max | 7.93 GPM |
| Volumetric Flow Rate, Min | 0.13 GPM |
| See All Specs | |
PDFs & Manuals
Accessories
Show Ratings & Reviews