Various load cell types are preferred, relative to the needs of the laboratory or operational environment. When you need to convert force into a measurable electrical output, the load cell or transducer, is the best application.
Strain gage load cells are accurate within 0.03 to 0.25%. Used for experimental stress analysis and electrical measurement of resistance to strain, these load cells are used in most industrial applications. But there are different design based on the enclousure and the application.
How to select a Load cell?
Selecting a load cell is dependent entirely on the application. This begins with identifying the type of load cell needed to conduct a specific measurement. It can include bending, compression, tension, shear, etc. Load capacity is another factor to consider while selecting a load cell.For high-endurance applications, choose a load cell with a higher fatigue life. Besides, the type of loading condition is also important. For dynamic loading conditions, a load cell with a high-frequency response is usually preferred. Other load cell's factors and specifications to consider include size, accuracy and resolution, remote applicability, and extra instrumentation needed depending on the measurement requirements.
Types of Load Cells
Miniature
Miniature load cell
Subminiature and miniature load cells are designed to perform in high capacity loads with minimum available space. Heavy-duty 50.8 mm (2") diameter compression load cells have a low profile, the small size accommodates test benches, industrial weighing applications and prototype structures.
They should include a twist-lock connector and a cable connection. There are miniature load cells in metric configurations, ranging from 0 to 100 and 0 to 50,000 Newton range.
Sought after features: stainless steel rugged construction, built-in load button, high-accuracy and a 5-point NIST traceable calibration included.
Strain
Strain load cell sensors are suitable for accurate dynamic and static measurement. Designed with a grid of fine grade wire or foil that is bonded to a carrier matrix backing, proportional variance of electrical resistance is in linear variance with grid strain.The strain is found by measuring change in resistance when force is applied to the carrier matrix, which is bonded to the surface. The carrier matrix and adhesive bond work together to transmit strain or change in resistance to the grid. Adhesive and carrier matrix also dissipate heat and insulate against electrical noise, which can act as interference and alter readings.
The Wheatstone Bridge Circuit Theory is widely used in static strain measurement for its outstanding sensitivity.
Beam
Bending beam load cell
Low-capacity bending beam load cells made of aluminum alloy have a capacity range from 1 to 500 kg. Used for OEM force measurement and weighing applications, industrial benefits include cost efficiency. Single point load cells are also aluminum alloy with 1 to 500 kg capacity ranges.
Heavy-duty shear beam load cells are manufactured in corrosion resistant, nickel-plated, carbon-steel alloy. Shear beam and double beam load cells are also used in multiple cell applications like tank weighing and industrial process control.
Cantilever or bending beam load cells are used for static weight, dynamic weighing, as well as force measuring operations.
Platform
These hermetically sealed load cells are best for applications requiring water tightness and high accuracy, such as industrial food processing, weighing, and automatic weighing stations.Resistive load cells built with bonded foil strain gages can be accurate to ±0.02% of full scale, they offer off-center load compensation which is useful for building scales that are accurate, even when objects to be measured are placed anywhere on a loading platform.
S-Type beam load cells receive compression output readings. They are designed to provide best performance in compact and versatile units, suspended loads, tank weighing, and hoppers.
Canister Style
Canister Load cell
This type of load cell is used for single and multi-weighing applications, also hermetically sealed and water resistant. The heavy-duty design canister load cell sensors are environmentally sealed to accommodate harsh environments, and are best for axial compression applications.
Hydrostatically Compensated—Used for submerged operations like marine weighing, underwater platforms, in pit flooding environments, and on dry docks.
All stainless steel construction is very reliable in harsh underwater conditions.
Tension/Compression
Tension load cells or compression load cells are versatile with low profile and welded stainless steel design. They are highly accurate in monitoring compression and tension forces.Industrial load cells with threaded load connections are constructed to measure tension or compression forces in harsh industrial environments. Bi-directional units range from 25 to 10,000 pounds in 2" diameter (FSO Linearity of ±0.15%).
Evaluating Load Cell Selection
CC1 Compression Load Cell
Measurement Duration: Short-term duration with a Tare, or longer measurement durations where Tare is not applicable
Output Requirements: Digital USB, wireless, digital RS232/RS485, analog mV/V, 0 to 5V, 4 to 20 mA
Measurement Speeds: 1 Hz, up to 100 Hz, faster than 100 Hz
Direction of Loading: Tension, compression, combination of both
Percent Accuracy Requirement: As a percentage of reading, or percentage of full scale output
Operating Temperature Conditions: Room temperature, outdoor temperature, well-controlled environment, harsh environment with wide range temperature and humidity changes
Options for Mounting: Fastening sensor to both sides, unfastened mount
Certifications Requirement: Trade applications: NTEP or OIML certifications, testing or measurement ASTM E-74 or R&D certification
Operations Cost: Totals depend on small quantities, or bulk volumes
- What is a Load Cell?
- Types of Load Cells
- Selecting a Load Cell
- FAQ
- Installing a Load Cell
- How to Wire a Load Cell?
- Troubleshooting
- Amplifiers for Load Cells
- Data Loggers for Load Cells
- Load Cell Meter
- Load Cell Controller
- Signal Conditioners
- Weighing Trucks, Trains, and Aircraft
- Dynamic Load Measurement
- Testing Load Tolerance in Cables
- Critical Component in X-ray Laser
Accelerometer: What is it & How it Works | Omega What is an Accelerometer?
Custom Pressure Transducers, all you need to know Introduction to Pressure Transducers Manufacturing