Skip to search Skip to main content Skip to navigation

Click and hold to zoom

PR-10

RTD Probe with Insulated Wire and Shrink-Tube Support

0.0

(0)

Models In Stock

Low temperature range: -50 to 250°C (-58 to 482°F)
High temperature range: -50 to 450°C (-58 to 842°F)
Extreme temperature range: -200 to 600°C (-328 to 1112°F)
Class A accuracy conforming to IEC 60751

See Product Overview

PR-10

From ^$ 35.02

Models In Stock

Shop Models

More Variations Available

See all series options below

Data Sheet

Can't find the right model?

Use our custom configurator to fine tune your product

Product Overview

Accuracy Class A
Accuracy Detail Class A from -100 to 450°C (-148 to 842°F); or else Class B
Cable Material PFA
Electrical Connection Stripped Leads
Enclosure Ratings IP67
Insulation PFA
Nominal Resistance/Curve Note 100 Ω at 0°C standard; TCR = 0.00385 Ω/Ω/°C standard
Probe Type RTD Probe with Insulated Wire and Shrink Tube Support
Sheath Material 316 Stainless Steel
Shock IEC 60068-2-27; 50g/11ms (15 probes tested together) Duration: 1 day
Temperature Coefficient 0.00385Ω/Ω/°C
Temperature Coefficient Note α=0.00385Ω/Ω/°C
Temperature Probe Style Immersion Probe
Temperature Sensor Type RTD
Vibration IEC 60068-2-6; 5 to 2000 Hz sweep rate, one active per minute;10 sweep cycles; acceleration 5g (15 probes tested together) Duration: 1 day
Wire Gauge 26 AWG
Wire Termination Temperature, Max 250 °C

Omega's RTD probe with insulated lead wire has a shrink-tube strain relief support at the sheath/wire transition to provide wire flexibility and durability. This 316 stainless steel probe is offered in 2-, 3-, or 4-wire configuration. This is available in three temperature ranges covering -200°C to 600°C (-328 to 1112°F) to accommodate your specific temperature needs. Applications for this probe include liquid immersion, slurries and emulsions, granular material measurements, as well as temperature monitoring of heat bars, kilns, and pipes.

PDFs & Manuals

PR-10_spec View More

View Less

Compliance

View Less

Reviews

Show Ratings & Reviews

0.0

(0)

Rated 3 out of 5 by UC Davis Medical Center from RTD Probe review The connection point from the probe to the wire is a weak point that has broken a few times. We have repaired and/replaced this probe multiple times. Also the connection to the thermometer has failed as well.

Date published: 2021-03-02

Rated 4 out of 5 by 648965742 from Good for static measurement, response time varies Easy to use, accurate devices. Warning, I saw different response times between the two devices I ordered when the temperature was changing rapidly. One responded to an 80 C difference in ~ 1 min, the other took 5 min to stabilize.

Date published: 2020-07-20

Rated 3 out of 5 by paddy from Nice design - Required proprieatay connector I bought an Omega data logger with 4 thermocouple inputs and 2 RTD connections. The device worked right out of the box - is easy to use and record with. Unfortunately Omega has designed the data logger so that we have to use their proprietary connectors , almost like an earphone jack, for the RTDs. My master technician tried to solder these connects and messed one of them up. Called up Omega. 3 week lead time, and no they would not replace the connector. a Little disappointed on that front. Very limited instructions on how to solder this connector. We guessed as to what terminal goes to what RTD wire and took an educated guess. Lucky for us our guess was right.

Date published: 2018-03-26

Rated 5 out of 5 by Good One from AMAZING AND HELPFUL Exactly what we needed and Sales associate was extremely helpful.

Date published: 2024-11-11

Rated 5 out of 5 by M Leonard from Great Company, Great Product Great product, exactly as expected. The Team at Omega is easy to work with. Great customer service. 10/10!

Date published: 2024-09-19

Rated 5 out of 5 by DinRail from Great product Consistently reliable temp monitoring. Easy to install and works great in a wide range of areas

Date published: 2023-09-24

Rated 5 out of 5 by Union College from RTD Probe great product and will purchase more as time goes on

Date published: 2023-05-19

Rated 5 out of 5 by Anonymous from 1,000 Ohm RTD Thermocouple Omega was fantastic to work with. I needed a single, 1,000 Ohm thermocouple to repair an old dental oven and they helped me determine what I needed and I had a new thermocouple in a month. Oven works like new now.

Date published: 2022-11-05

RTD Probe with Insulated Wire and Shrink-Tube Support Reviews - page 2

Questions & Answers

Videos & Downloads

PR-10

RTD Probe with Insulated Wire and Shrink-Tube Support

What is the maximum pressure rating for this RTD probe?

Can these probes be bent 90 deg at about the midpoint and still function properly?

What is the MTBF of these RTDs? Specifically looking at Naval Sheltered environments.

What is the tolerance on the diameter and length?

What is the accuracy of the probe?

Does the entire probe need to be in the temp you want to measure? Measuring area with heat >250C, can you have the probe in this area until 20*diameter of probe, and thread the rest of the probe so the start of the lead wire is in an area <250C

Do extension wires have to be special wire?

Hello. What length of PT-1000 tip must be in touch with fluids? This length is the same as the one of PT-100? Thank you.

PR-10

RTD Probe with Insulated Wire and Shrink-Tube Support

What is the maximum pressure rating for this RTD probe?

Can these probes be bent 90 deg at about the midpoint and still function properly?

What is the MTBF of these RTDs? Specifically looking at Naval Sheltered environments.

What is the tolerance on the diameter and length?

What is the accuracy of the probe?

Does the entire probe need to be in the temp you want to measure? Measuring area with heat &gt;250C, can you have the probe in this area until 20*diameter of probe, and thread the rest of the probe so the start of the lead wire is in an area &lt;250C

Do extension wires have to be special wire?&nbsp;

Hello. What length of PT-1000 tip must be in touch with fluids? This length is the same as the one of PT-100? Thank you.

Does the entire probe need to be in the temp you want to measure? Measuring area with heat >250C, can you have the probe in this area until 20*diameter of probe, and thread the rest of the probe so the start of the lead wire is in an area <250C

Do extension wires have to be special wire?