Welcome to our new website, found an issue or bug? Please report it here
1PT100FR-RTD-ELEMENTS
Ruggedized Thin Film RTD elements
Models In Stock
- Designed for High Vibration Use
- Rugged Cylindrical Element
- Length: 8mm(0.31') or 13mm(.51')*. Diameters: 2.8mm(.11') or 4.5mm(.18')*
- Ro = 100, 500, or 1000 Ω
1PT100FR-RTD-ELEMENTS
From
$
20.98
Models In Stock
Product Overview
- Accuracy Class B
- Accuracy Note Class B per IEC60751
- Air Velocity, Max 1 m/s
- Insulation Resistance > 10 MΩ
- Insulation Resistance Note >10 MΩ @ 20°C; >1 MΩ @ 500°C
- Lead Material Platinum Clad Nickel Wire
- Long Term Stability Max R/0-drift 0.1% after 1000 h @ 500°C
- Operating Environment Unhoused for dry environments only
- Process Temperature, Max 500 °C
- Process Temperature, Min -70 °C
- Sensor Height 8 mm
- Shock Resistance 100 g Acceleration with 8 ms Half Sine Wave
- Temperature Coefficient 3850 ppm/K
- Temperature Sensor Type RTD
- Vibration Resistance 10 to 2000 Hz sweep rate, acceleration 40g
- Water Velocity, Max 0.4 m/s
- Wire Length 6 mm
FR series elements are designed for applications where high vibration resistance as well as high temperature stability is vital. Typical industrial applications include analytical equipment, chemical plants and mechanical equipment. Small tolerances on diameter allow problem free installation in protective tubes.
*Dimensions are ± 0.3mm(.012")
Note on Assembling Omega "FR" Series RTD Elements to Extension Wires: These RTD elements are made with platinum coated nickel lead wires. Since platinum does not easily wet with most soft solders, we advise that they be spot welded or silver soldered to extension wires when required.
*Dimensions are ± 0.3mm(.012")
Note on Assembling Omega "FR" Series RTD Elements to Extension Wires: These RTD elements are made with platinum coated nickel lead wires. Since platinum does not easily wet with most soft solders, we advise that they be spot welded or silver soldered to extension wires when required.
PDFs & Manuals
