1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
SA1
Self-Adhesive Polyimide Fast Response Surface Thermocouples
Models In Stock
SA1
From
$
140.92
Models In Stock
Product Overview
Show Ratings & Reviews
Rated 5 out of
5
by
PillarofIN from
Inexpensive monitoring
Purchased the thermocouples with 120 inch cable to monitor bearing temperatures on inaccessible vacuum pumps. For $20 each it is an extremely cost effective way to monitor these devices.
Date published: 2016-08-08
Rated 5 out of
5
by
bobby38 from
Very Accurate
I use these all the time in wireless temperature transmitters, work great!
Date published: 2016-03-20
Rated 1 out of
5
by
CJB1 from
horrible self adhesive
the backing on the adhesive will not come off with
Date published: 2025-03-12
Rated 5 out of
5
by
Kuhn North America from
Very satisfied
Product received was just as described and shipped quickly.
Date published: 2024-12-13
Rated 5 out of
5
by
PROCESS CONTROL from
TERMOCUPLA
It is a good product, delivery time is fast. I recommend it.
Date published: 2024-05-13
Rated 5 out of
5
by
George N from
Great and easy to use for R&D testing
Excellent thermocouple for R&D testing. Accurate and simple to use.
Date published: 2024-03-01
Rated 5 out of
5
by
Michelle LeBrun from
Item as described in title
Very fast shipping and great communication of status of order.
Date published: 2024-02-09
Rated 5 out of
5
by
MJames from
Great product
Worked as expected for reading temperatures. Good product.
Date published: 2023-12-18
Are these thermocouples resistant to electrical noise? How can I shield these thermocouples?
Hi Varll,
Thank you for the inquiry. The SA1 series have a polyamide film on the top and bottom of the thermocouple element. This insulates the TC from electrical noise via direct contact with process. If you experience electrical noise via RF please contact us for more solutions.
Best regards
OMEGA
Date published: 2024-03-24
Does the adhesive contain silicone?
The PSA is a Silicon based adhesive
Date published: 2021-02-15
With the strain relief option: Would the connector type able to come as Female instead of Male?
Thank you for your inquiry. We can only provide the male connector with the strain relief for this thermocouple.
Date published: 2024-08-01
Are these thermocouples suitable for an outdoor application? Specifically installation on the back of a solar panel for extended periods of time (> 6 months).
Yes, I have used these for that exact application with some Kapton tape on the TC and they work well.
Date published: 2020-05-20
What is the life expectancy in a heat cycling application with 50 psi applied?
Thank you for your inquiry Bob58. These probes are not pressure rated and they have not been tested on pressurized environments. We do not recommend the use of this probe in pressure environments. Life expectancy for any of our of products depends on the frequency the product is used.
Date published: 2023-11-25
Can I use this Thermocouple and connector with the wireless unit SS-002-0-NA?
Thank you for your question. You have to purchase the model thermocouple with stripped leads because SS-002-0-NA has screw terminals for wire connection.
Date published: 2020-09-05
I would like to get the polynomial curves for the SA1 T-type and J-type thermocouples. Where can I find that data?
You can request the ITS-90 Thermocouple Polynomials by sending it to temp@dwyeromega.com and one can be sent to you.
Date published: 2024-06-12
Can this thermocouple be installed in a cylindrical metal surface? Cylinder diameter range 6-in to 12-in
Yes this Thermocouple can be installed on a cylinder and most curved surfaces.
Date published: 2020-09-08