1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
KHRA-KHLVA-KHA-SERIES
Self-Adhesive Polyimide Flexible Heaters 302 °F Max
Models In Stock
KHRA-KHLVA-KHA-SERIES
From
$
78.48
Models In Stock
Product Overview
Show Ratings & Reviews
Rated 5 out of
5
by
josis from
Great adhesive and quick heatup!
I bought this for a project at our company, and it does exactly what it was intended for. The adhesive sticks to what is desired very easily, and it does not want to peel off, even with lots of heat cycling. The heaters also seem to get up to temp fairly quickly. So these heaters are excellent if you want good heating times!
Date published: 2018-12-17
Rated 2 out of
5
by
Stephen D from
Silicone is a no no in a vacuum chamber
We used these Kapton heaters all over our space simulation chamber but due to the recent addition of the silicone strain relief we have to go somewhere else.
Date published: 2019-02-04
Rated 5 out of
5
by
0007 from
Great product, lasts over time
these are really good and reliable, true to size listed, adhere and do not peel off when heated.
Date published: 2024-10-21
Rated 5 out of
5
by
cmax13007 from
Fast and Speedy shipping
Processed Ordering and very quick to ship. Products arrived as described.
Date published: 2024-06-15
Rated 5 out of
5
by
Jonny1234 from
the heaters were delivered on time and work great
the heaters were delivered on time and work really well
Date published: 2024-03-18
Rated 5 out of
5
by
Anonymous from
Effective
Effective and reliable patch heaters at a reasonable price.
Date published: 2024-01-02
Rated 5 out of
5
by
Asfia Saleem from
Wonderful Website
amazing quick response from Omega...products are of high quality
Date published: 2023-10-31
Rated 5 out of
5
by
James V from
Quality
Rock solid performance, performs as advertised, well built
Date published: 2023-07-19
KHLVA-101-5-P we are planning to use this heater in our designing , Here by I have some query regrading the heater 1) what is the minimum input voltage and maximum input voltage required to drive this heater
is that possible to drive the heater with PWM input?
Date published: 2022-12-22
1. Does the Polyimide Flexible heater p/n KHLVA-101-10-P use the same adhesive backing as the SA1-RTD? 2. What is the projected lifetime of the adhesive? 3. Is a conductive epoxy recommended in addition to the pressure sensitive adhesive?
The two adhesives are not the same but similar. The life of the adhesive depends on the environment in which they are used. If they do not exceed the rated temperature and there are no contamination, in theory, the adhesive should last a very long time. No data to provide. You can also use a thermally conductive epoxy for additional adhesion.
Date published: 2020-02-18
About KHLVA Series, Rectangular, 28Volts, input voltage is 28V according to the spec. Are these heater available for DC volts? which range is 26.5Vdc to 32Vdc.
Thank you for your inquiry. DC Voltage is acceptable. 28VDC is the maximum voltage supply that can be applied.
Date published: 2023-11-14
Dear Team, We are planned to KHLVA-101-5-P in our designs ,If I give 24PWM and 0.153A to Heater, what will be the heat generated at heater side? is there any graphs related to current VS Heat generate ?? Requesting you to helps us on this !
Thank you for the inquiry. We do not have a way to calculate heating power in watts when a pulse driven solid state relay is used. If you apply a DC voltage at constant level then the power law and Ohm's Law can be used to calculate heating power in watts.
Best regards
OMEGA
Date published: 2022-12-29
Does the heater have a polarity specification or can it be wired in any direction?
Thank you for your inquiry. The KHLVA-205/10 is an AC load. There is no polarity when connecting an AC load.
Date published: 2024-10-04
What is the wire gauge of KHLVA-102/10-P?
The KHLVA Heaters use 22 AWG PTFE insulated lead wires.
Date published: 2024-12-14
Hi, is this model compatible with a PID temperature control?
Thank you for your inquiry. Our heaters are compatible with PID Controllers. Please contact us directly at temp@omega.com for more information.
Date published: 2023-06-07
Can the product be compressed between 2 platens under roughly 3000 lbs (around 10 MPa) of force?
The specification for load on the Kapton Heaters is 5Kg/cm2 or about 71 PSI.
Date published: 2022-10-17