Welcome to our new website, found an issue or bug? Please report it here
LC702
Male/Male Thread Connection, Inline Tension Link Load Cell
Models In Stock
- Male to Male Thread Connection
- 5 Point NIST Traceable Calibration with
- 59 kOhm Shunt Cal Data
- All Stainless Steel Construction
LC702
From
$
1,435.87
Models In Stock
Product Overview
- Accuracy ± 0.15 %
- Bridge Resistance 350 Ω
- Calibration Option 5 POINT NIST
- Electrical Output 2 mV/V
- Enclosure Ratings IP67
- Force Type Tension
- Hysteresis ± 0.10%
- Linearity ± 0.10%
- Load Cell Type Tension Link
- Materials Stainless Steel
- Operating Temperature, Max 121 °C
- Operating Temperature, Min -34 °C
- Overload, Max 300% FS
- Process Temperature, Max 71 °C
- Process Temperature, Min 16 °C
- Repeatability ± 0.05%
- Safe Overload 150% FS
- Supply Power Note 10 Vdc, 15 Vdc maximum
- Supply Voltage 10 Vdc
- Thermal Span Effect ± 0.009% FSO/°C
- Thermal Zero Effect ± 0.009% FSO/°C
- Wiring/Connector Table Green: (+) Output; White: (-) Output; Black: (-) Input; Red: (+) Input
- Zero/Balance Error ± 1%
OMEGA’s LC702 Series Tension Links have a 6 ft (2 m) cable, and the LC712 Series have an integral connector. Both series are all stainless steel high capacity in-line tension load cells, for applications including cables on cranes, support rods in architectural designs, engine test beds, and industrial weighing applications.
SPECIFICATIONS
Output: 2 mV/V ± 0.25 % FSO
Excitation: 10 Vdc (15V max)
Linearity: ± 0.10% FSO
Hysteresis: ± 0.10% FSO
Repeatability: ± 0.05% FSO
Zero Balance: ± 1.0% FSO
Operating Temp Range: -34 to 121°C (-30 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Zero: ± 0.009% FSO/°C (± 0.005% FSO/°F)
Span: ± 0.009% FSO/°C (± 0.005% FSO/°F)
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Bridge Resistance: 350 ?
Construction: Stainless steel
Electrical:
LC702: 1.8 m (6') 4-conductor cable
LC712: DT02H-10-6P (or equiv.)
Protection Class: IP67
LC712 Mating Connector: PT06F10-6S, sold separately
SPECIFICATIONS
Output: 2 mV/V ± 0.25 % FSO
Excitation: 10 Vdc (15V max)
Linearity: ± 0.10% FSO
Hysteresis: ± 0.10% FSO
Repeatability: ± 0.05% FSO
Zero Balance: ± 1.0% FSO
Operating Temp Range: -34 to 121°C (-30 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Zero: ± 0.009% FSO/°C (± 0.005% FSO/°F)
Span: ± 0.009% FSO/°C (± 0.005% FSO/°F)
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Bridge Resistance: 350 ?
Construction: Stainless steel
Electrical:
LC702: 1.8 m (6') 4-conductor cable
LC712: DT02H-10-6P (or equiv.)
Protection Class: IP67
LC712 Mating Connector: PT06F10-6S, sold separately
PDFs & Manuals
Show Ratings & Reviews
Hello, what is both thread on model LC702-100K. Thanks
Hello, per the spec sheet threads for 100K range will be 2 1 ⁄4-12 UN
Date published: 2024-03-27
What would be a typical signal to noise ratio using load cells LC101 and LC 702?
Thank you for your question, this is very dependent on the particular application but if only talking about load cells the LC101 is little better than LC702 because LC101 output sensitivity is 3, and the LC702’s output sensitivity is 2mV/V.
3 to same noise ratio is bigger than 2, but not much different. If want to reduce the noise ratio, the best way is to use load with built-in amplifier which will increases output over noise, additionally we would recommend the use of short cables.
Date published: 2020-04-02