Series-PBLT2-PBLTX

Submersible Level Transmitters for Wastewater & Slurry, 316 SS, UL Certified

(0)

Models In Stock

Meet application requirements with durable cage design with large diameter 316 SS diaphragm seal that is non-clogging and damage resistant to floating solids
Increased life with lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty) on PBLT2 models
Eliminates particulate or water droplets from entering the transducer using maintenance-free filter
Peace of mind with UL approved intrinsically safe on PBLTX models for use in hazardous locations when used with proper barrier

See Product Overview

Series-PBLT2-PBLTX

From ^$ 821.75

Models In Stock

Shop Models

More Variations Available

See all series options below

Data Sheet

Product Overview

Accuracy Note ± 0.25% FS (includes linearity, hysteresis, and repeatability)
Compensated Temperature, Min 0 °F
Electrical Connection Pigtail Leads
Electrical Output 4 to 20 mA
Loop Resistance 900 Ω
Media Compatibility Consult Factory
Mounting Suspended in Tank Below Level Being Measured
Output Detail 4 to 20 mA DC, 2-wire
Output Signal Current
Proof Pressure 2x Full Scale
Protection Lightning And Surge Protection
Response Time 50 ms
Supply Power Type DC
Thermal Effect ± 0.02% FS/°F

PBLT2 and PBLTX Submersible Level Transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Perfect for wastewater and slurry applications with features to protect the unit from these demanding applications. Large diameter 316 SS diaphragm seal is non-clogging and damage resistant to floating solids.

The PBLT2 incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty). The PBLTX is UL approved intrinsically safe for use in hazardous locations when used with proper barrier.

Units come equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer.

If you don't see the exact model in the ordering section, please use one of our product configurators below:

(Not UL Approved)

(UL Approved)