The FPDM3000 Series positive displacement oval gear flow meters come in three choices of wetted material combinations for compatibility with a large variety of liquids.

The FD-400 Series ultrasonic doppler flowmeters measure the flow of liquids that contain sound reflectors, suspended solids, or gas bubbles larger than 100 microns.

The DPF75 is a combination 6 digit totalizer/batch controller and 5 1 /2 digit ratemeter with two relays for 2-stage batch control or dual rate alarms.

The DPF60 is a combination microprocessor-based digital rate indicator and integrating totalizer, 6 Digits Display, Relays Latch or Auto-Recycle, NEMA 4X.

The DPT35 digital counter-timer is designed to be used with OMEGA™ (or similar) meters and flow sensors that produce a pulse signal, Wall-Mount NEMA 4X

The DPF11 miniature batcher is ideal for all batching/grand total applications with 30 mV Magnetic Pickup Inputs - 10 kHz Max. , RS422/RS232, NEMA 4X

The DP63100 analog process panel meter offers many features and performance capabilities to suit a wide range of industrial applications.

All features of the FMA6600 and FMA6700 Series flow meters can be accessed via the local keypad and LCD. The digital interface operates via RS485 (optional RS-232 available)

The FMA-4100/4300 Series flow rate can be displayed in 23 different volumetric flow or mass flow engineering units including a user specific selection with remote programming

1/8 DIN 6-Digit Rate Meter/Totalizer with 6-Digit 7-Segment LED, Measures Rate from 0.5 Hz to 30 kHz. TTL compatible, NAMUR, and Totalizes Up or Down from -99,999 to 999,999

Rugged In-Line Flow Sensors Available in 1/2", 3/4", and 1-1/4" sizes are protected in a sturdy cast aluminum enclosure, and are easy to install and mount in any position.

Battery powered flow indicator and totalizer with 3 totalizers, large display, and averaging. It has a user selectable access code, auto-calibration, and no-flow indicator.

Specifically designed for water billing applications, OMEGA's FTB-4000 flowmeters are highly accurate and feature tamper-resistant, non-resettable totalizers.

FTB8000HW uses the multi-jet principle that has been an accepted standard for many years. This type of meter is known for its wide range, and accuracy in low quality water.

The FTB-630 Series turbine meters are dry-register mechanical totalizers that offer accurate, economical reading of high flows with low pressure loss.

FMA6500 Series flow controllers allow one to program, record, and analyze flow rates of various gases with a computer via an RS485 interface (optional RS232 is available).

Batching flow processor with output controls, flow rate, large digits, analog 4-20 mA active and passive loop configuration. Two programmable pulse scaled outputs, 220VAC.

OMEGA’s melt pressure indicators also function as transducer power supplies and signal conditioners, OLED graphic display, Universal power.

FTB Series totalizers are used in applications where accurate measurement of (#2, 4 or 6) heating oil flow is required. The FTB-32 features a fully rotatable, easy-to-read face.