Welcome to our new website, found an issue or bug? Please report it here
SRFRA-SRFGA
Silicone Rubber Fiberglass Flexible Heater 450 °F Max to 48 in
Models In Stock
- Lightweight,Thin, Flexible
- Available in 2.5, 5 and 10 W/in2
- -56°C(-70°F) to 232°C (450°F) Operating Temperature
- Etched Foil
SRFRA-SRFGA
From
$
43.95
Models In Stock
Product Overview
- Bend Radius, Min 2 in
- Dielectric Strength 1250 Vac
- Heater Material Silicone Rubber
- Heater Thickness 0.04 in
- Heater Thickness Note 0.040" except at lead wire exit
- Lead Length 305 mm
- Lead Length Note 305 mm (12") PFA insulated
- Operating Temperature, Min -56 °C
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Dario from
Very durable and easy
Wonderful product, I use it inside our Nema enclosure to avoid the switch to froze and they work great, very durable and super easy to install
Date published: 2021-05-06
Rated 5 out of
5
by
Josep from
Easy to install and functional.
We are using them to bake an ultra-high vacuum chamber and they work very well.
Date published: 2024-02-09
Rated 5 out of
5
by
Mackenzie Aircraft from
Happy with Purchase
Good quality, fast availability. Always easy to work with.
Date published: 2023-06-01
Rated 5 out of
5
by
M ARM from
Excellent
Product as described, fast delivery, and easy order process
Date published: 2023-02-21
Rated 1 out of
5
by
Anonymous from
Buyer be where
Picture is not what you will get. Nothing stated item will need other parts to work. Returned item at additional cost. VERY Frustrated.
Date published: 2023-02-08
Rated 5 out of
5
by
Stanford from
Great Product
These were perfect for the application, I will be purchasing more in the future.
Date published: 2023-01-06
Rated 5 out of
5
by
Josh b from
Flexible Heater
Great product. It works as intended with no issues.
Date published: 2022-11-11
Rated 5 out of
5
by
Harrison Longbows from
Five Stars
This product can have multiple applications. I’m a bowyer. I use it to laminate bow limbs.
Date published: 2022-03-27
I need a heating film with 15mm hole in the middle. Outer dimentions should be 5cm x 5cm. Opertating temparature range should be 30-100C. What are the options I have?
This would not be a standard part. Most custom designs have a $1000 min order and 8-10 week lead time. Please send your request including quantity along with a dimensional drawing or sketch to: heaters@omega.com
Date published: 2020-02-24
i need to heat a small metal bucket to 300 degrees fahrenheit and maintain it for about 2 hours. the metal bucket is grounded. can these heaters do that without shorting out?
Thank you for your inquiry. Though the flexible can indeed heat surfaces of metal, we advise you click this link to find out the exact wattage needed in your application https://www.omega.com/en-us/resources/flexible-heaters
Date published: 2022-06-16
I am looking at trialing this product. Is there a Round in stock 110V that I can get quickly for trial purposes?
Thank you for your inquiry. Please contact our Sales Tema directly for product availability sales@omega.com
Date published: 2021-02-05
Will these work for replacement heater element on an ultrasonic cleaner?
Thank you for the inquiry. Please forward this question to TEMP@DWYEROMEGA.COM
Best regards
OMEGA
Date published: 2024-05-18
I need a pad that heats to 98 F and maintains at +- 2 degrees. Do any of these products do this? A 10 inch to 6 inch square works well. Thanks
Thank you for your inquiry biggbell. Unfortunately, we need more information in order to recommend a product like the power and power density. Please send an email to heaters@omega.com that way one of our engineers can provide further assistance.
Date published: 2024-03-22
i want to use a heater to heat and maintain a chamber at 140 degrees for extended periods of time. will something like a 10X11 silicon mat work to heat quickly?
This would heat the material that it is attached to quickly if you purchase in 10 watts/sq. inch, but for chamber heater quickly, we would suggest some type of enclosure heater which would be more efficient. If you search our site by this keyword you will find various ones that can be chosen.
Date published: 2020-03-09
Can you please post the nominal thicknesses (main body and part where wires exit) for 3D modelling purposes?
For Dimensional details not specified in the Website manual(thickness varies with heater), please email your request to heaters@omega.com
Date published: 2020-04-24
Hi! I want to use this to sit on the stage of an extrusion printer I am experimenting with. Does this come with a temperature controler or would I need to buy that separately?
Thank you for your inquiry Diana. These heaters don't come with a temperature controller. You would need to buy them separately. Here is the general link to our PID controllers: https://www.omega.com/en-us/control-monitoring/controllers/c/pid-controllers
Date published: 2022-10-04