Welcome to our new website, found an issue or bug? Please report it here
SRFG-110/5-P-230VAC
Silicone Rubber Fiberglass Flexible Heater 450°F Max
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $28.59 |
| 5-10 | $27.16 |
| 11-24 | $26.59 |
| 25-49 | $25.45 |
| 50-99 | $24.87 |
| 100+ | $24.30 |
Product Specs
<< See all Product Models| Brand |
 |
| Diameter | 0 in |
| Dielectric Strength | 1250 Vac |
| Element Shape | Rectangular |
| Heater Material | Polyimide |
| Heater Power | N/A |
| Heater Thickness | 0.07 in |
| Heater Thickness Note | 0.030 to 0.070", except at lead wire exit |
| Lead Length | 305 mm |
| Lead Length Note | 305 mm (12") PFA insulated |
| Length | 10 in |
| Operating Temperature, Max | 149 °C |
| Operating Temperature, Min | -56 °C |
| Power Density, Max | 5 W/in² |
| Pressure Sensitive Adhesive (PSA) | true |
| Supply Voltage | 230 Vac |
| Width | 1 in |
| See All Specs | |
Show Ratings & Reviews
Rated 5 out of
5
by
Nathan from
Absolutely perfect for my needs
This silicone heater is great, it heats quickly and evenly , with a pid controller it maintains a very steady temperature. Shipped quickly and was packaged nicely with no shipping damage
Date published: 2016-05-18
Rated 5 out of
5
by
silverx10 from
Absolutely incredible bed!
I purchased this heat pad to use as the heatbed heating element in my build of the VORON CoreXY 3D printer, and I couldn't be happier. It works flawlessly, heating up insanely quick without any kind of dips in temperature over the duration of the build.
I've only just become aware of Omega as a company, but I know that I'll be coming back for more of their products in the very near future!
Date published: 2017-01-05
Rated 3 out of
5
by
wjp9485 from
heater gets hot
The heater was wrapped around a 1" diameter aluminum bar and did not stick as well as one would hope. Expensive shipping. Kinda feels like it was more expensive than it should be.
Date published: 2017-05-11
Rated 5 out of
5
by
jlastofka from
Nice quality thin heat strip.
Just what I needed in a low clearance location under the heated bed of a 3D printer to get some heat out near the edges (I bought four 1x8" strips). The stock printer has a heater only in the middle area of the printing bed so there's a lot of temperature dropoff toward the outside. Not now:-)
I connected these to a lamp dimmer switch and I set an approximate Wattage and let the printer's control circuit make up the difference to do its set pint control.
Date published: 2016-12-27