SSRDIN600

Single- and Three-Phase DIN Rail Mount Solid State Relays

(0)

Models In Stock

Ratings Up to 30 A (22.5 mm), 45 A (45 mm), or 25 A 3-Phase
LED Input Status Indicator
Integral Heat Sink Eliminates the Need for Complex Thermal Calculations
DBC Substrate for Superior Thermal Performance

See Product Overview

SSRDIN600

From ^$ 95.49

Models In Stock

Shop Models

12 Variations available

See all series options below

Data Sheet

Product Overview

Current, Min 100 mArms
Enclosure Ratings IP20
Frequency 40 to 63 Hz
Housing Material UL 940VD (self-extinguishing)
Input/Output-to-Ground Isolation 4000 Vrms
Input Resistance Current Regulated
Input-to-Output Capacitance 8 pF
Isolated Analog Voltage 4000 Vrms
Signal fail-safe 500 Vµs
Storage Temperature, Max 100 °C
Storage Temperature, Min -40 °C
Weight 600 g

Designed for superior thermal performance in harsh industrial environments, OMEGAâ€™s new SSRDIN/SSR3PH relay is the most advanced DIN rail solid state relay in its range. The epoxy-free design eliminates stress on internal components, preventing damage to the encapsulant during load failure. The vertical placement of the directbond substrate allows the SCR die to efficiently transfer heat to the heat sink and into ambient air. As a result, these relays can operate at a lower temperature than their competitors, which accounts for the higher I2T and surge-current ratings.

The SSRDINâ€™s internal transient protection is fully repeatable, making MOVs or other external suppressors unnecessary. This feature allows the output to conduct load-current when a transient is detected across the output terminals, rather than forcing load-current through the protection circuit. Thus, no degradation of protection occurs.

These relays are ideal for numerous commercial and industrial applications, including mercury relay replacement, professional food-service equipment (ovens, fryers, dispensing equipment, conveyors, etc.), sterilizers, temperature control systems, plastic extrusion/thermoforming machinery, HVAC and R, kilns, packaging equipment, sorting equipment, wave solder and reflow systems, lighting systems, pump controls, incubators, motor-switching, and UPS systems.

SPECIFICATIONS
Operating Temperature: -20 to 80ÂºC* (-4 to 176Â°F)
Storage Temperature: -40 to 100 ÂºC (-40 to 212Â°F)
Input-to-Output Isolation: 4000 Vrms
Input/Output-to-Ground Isolation: 4000 Vrms
Input-to-Output Capacitance: 8 pF (typical)
Operating Frequency: 40 to 63 Hz
Housing Material: UL 940VD (self-extinguishing)
Weight: 600 g (1.3 lb)
* For 108 to 280 Vac input.

PDFs & Manuals

SSRDIN600_spec SSRDIN600 View More

View Less

Compliance