Welcome to our new website, found an issue or bug? Please report it here
Series-3400
Smart Pressure Transmitter, HART® Comm, ATEX/IECEX, for water & chemicals
- High accuracy (± 0.075% FS)
- Rangeability (up to 100:1)
- Completely configurable using zero/span buttons (no calibrator required)
- Fail-mode process function
- Automatic ambient temperature compensation
Series-3400
From
$
1,169.75
Product Overview
- Accuracy ± 0.075 %
- Accuracy Note ± 0.075% FS (@ 20°C)
- Burst Pressure 30 psi Maximum
- Compliance CE
- Compliance Note CE; -IS, -FP suffix: ATEX Compliant 0518 II 2G ia/db IIC T6/T5 Gb Ta<80°C, T5 / II 2D Ex ia/tb IIIC T85°C/T100°C Db. Type Certificate No. KDB 17ATEX0056X. ATEX Standards: EN 60079-0:2012+A11:2013,EN 60079-1:2014, EN 60079-11:2012, EN 60079-26:2015, EN 60079-31:2014. IECEx Compliant: Ex ia/db IIC T6/T5 Gb / Ex ia/tb IIIC T85°C/T100° Db. Certificate of Conformity IECEx KDB 17.0008X. IECEx Standards: IEC 60079-0:2011, IEC 60079-1:2014-06, IEC 60079-11:2011, IEC 60079-26:2006, IEC 60079-31:2013
- Damping Time 0 to 60 s
- Electrical Connection 1/2 in NPT female Conduit with Screw Terminal block
- Enclosure Ratings IP66, IP67, NEMA Type 4X
- Materials Aluminum
- Materials, Wetted 316L Stainless Steel
- Media Compatibility Alcohols, Argon, Compatible Gases, Compatible Liquids, Nitrogen, Oils, Water
- MTBF 1,000,000 hours
- Operating Temperature, Max 185 °F
- Operating Temperature, Min -40 °F
- Output Detail 4 to 20 mA
- Output Signal Current
- Pressure Type Gauge
- Process Connection Size 1/2 in
- Process Connection Type NPT Male
- Response Time 16 to 480 ms
- Set Point, Min 1.45 psi
- Stability ≤0.075% FSO/3 years
- Supply Power Type DC
- Supply Voltage 10 to 55 Vdc
- Thermal Effects < ± 0.05% span/10°C
- Turndown Ratio 100:1
The Series 3400 Smart Pressure Transmitter is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and is programmable using HART® Communication. The Series 3400 is capable of being configured with the zero and span buttons (a field calibrator is not required for configuration). The transmitter software compensates for thermal effects, improving performance. EEPROM stores configuration settings and stores sensor correction coefficients in the event of shutdowns or power loss. The Series 3400 can be configured to be ATEX or IECEX approved for use in hazardous (classified) locations. The rangeability allows the smart transmitter to be configured to fit most applications.
Product Applications
- Water and wastewater
- Chemical and petrochemical
- Pulp and paper
- Oil and gas
- Food and beverage