Welcome to our new website, found an issue or bug? Please report it here
ON-400-PROBES
Precision Thermistor Sensors & Probes
Models In Stock
- Precision Thermistor
- Various Styles to Meet Numerous Applications
- Phone-Plug Connector Standard
- 2252 Ohm @ 25 Degrees C
ON-400-PROBES
From
$
78.54
Models In Stock
Product Overview
- Accuracy ± 0.1 °C (± 0.18 °F)
- Accuracy Note ± 0.1 °C @ 0 to 70°C
- Cable Length 120 in
- Electrical Connection 1/4 inch TS Plug
- Nominal Resistance 2252 Ω
- Nominal Resistance/Curve Note 2252 Ω @ 25°C
- Probe Insulation PVC
- Process Connection Size N/A
- Process Temperature, Max 100 °C
- Process Temperature, Min 0 °C
- Temperature Sensor Type Thermistor
- Thermocouple Type N/A
OMEGA ENGINEERING Series "400" probes are for use in laboratory and R&D applications and have
interchangeable sensor accuracy of ± 0.1°C. Each sensor is supplied with a 10-foot vinyl cable and
phone-plug connector. The Series "400" probes are 2252 Ohm @ 25°C.
interchangeable sensor accuracy of ± 0.1°C. Each sensor is supplied with a 10-foot vinyl cable and
phone-plug connector. The Series "400" probes are 2252 Ohm @ 25°C.
| Configuration Dimensions in mm (") | Model Number | Description | Temp. Rating | Application |
 | ON-401-PP | General Purpose. Used for short-term water and sub-soil readings. Most rugged, waterproof construction. | 100°C (212°F) | Buried |
 | ON-401-PP-V | Water resistant, soft, flexible, vinyl tipped version of above model. | ||
 | ON-402-PP | Small Flexible. Vinyl sheath and tip. Cuvette temperatures. General purpose measurement. Continuous length. | 100°C (212°F) | General Purpose |
 | ON-403-PP | Tubular. Stainless steel probe for rugged duty. Often used for liquid immersion. Probe is immersible only to cap. | 100°C (212°F) | Liquid |
 | ON-404-PP | Tubular-Glass. Chemically inert for liquid immersion use. Thermometric titration. Freezing point determination. Pyrex, 127 mm (5") long. | 100°C (212°F) | Liquid |
 | ON-405-PP | Air Temperature. Stainless steel probe suitable for test rooms, incubators, remote air readings, monitoring of gas streams, etc. | 100°C (212°F) | Gas |
| ON-406-PP | Same as ON-405-PP but with economical plastic housing. | |||
 | ON-408-PP | "Banjo" Surface Temperature. Skin, oral, axillary, water bath, air, surfaces temperatures. Stainless steel. | 100°C (212°F) | Surface |
 | ON-409-PP | Attachable Surface Temperature. Stainless steel cup, epoxy-backed. Easy to tape on flat surfaces. Good for heat loss or compression efficiency study of piping. | 100°C (212°F) | Surface |
 | ON-410-PP | Tubular With Fitting. Rugged, stainless steel probe with pipe fitting.Suitable for taking readings in pipes or inside closed vessels. | 100°C (212°F) | Gas, Liquid |
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Anonymous from
Accurate enough, we’ll see how long that lasts!
Handy piece of equipment, quite literally. That little prove you need to measure surface temperature.
Date published: 2023-08-26
What stainless steel material is this? It only mentions 300 series. Is this 304 or 316?
Thank you for your inquiry. The tube is made from 316. The transition barrel is made from 303.
Date published: 2024-04-18
For probe model 403, does the entirety of the probe need to be submerged in liquid to get an accurate reading? Also, for probe 409, can it be used in liquids?
The ON-403 can be immersed and 1" is probably a good depth to try and achieve. The ON-409 would not be suitable for use in liquid.
Date published: 2024-02-14
Can this probe be specially calibrated as a system with the HH42A to a specification of +/- 0.05 °C ?
Thank you for your question.
Although the ON-403-PP and the HH42A can be calibrated together, the accuracy would be the accuracy of the probe plus the accuracy of the HH42A so it can not be +/-.05C
Date published: 2020-07-13