1-800-663-4209 | Vos commentaires sont importants, répondez à un sondage rapide commentaires sur le site web
PGM-Series
Jauges de pression industrielles en acier inoxydable, remplissage par liquide
Modèles en stock
PGM-Series
Depuis
$
116.05
Modèles en stock
L'aperçu du produit
Afficher les notes et les avis
Rated 5 out of
5
by
Kev1975 from
Great Function and reliablity
I use this gauge on a portable air manifold system. Holds up well to travel and is reliable.
Date published: 2016-06-20
Rated 5 out of
5
by
Constsntin from
research
I'm happy with the product and quality. Pressure meter works well.
Date published: 2017-02-28
Rated 2 out of
5
by
Tpay from
Not the quality I was expecting.
The guage bounces around even with the correct oil added.
Date published: 2016-05-11
Rated 3 out of
5
by
Robert17 from
2 1/2" PGM Vacuum Gauge
Gauge delivered on time. On arrival our calibration staff checked the gauge and found that it couldn't be zeroed. Contacted customer service and was told the gauge could not be returned because it had been used. Understood that it was a cheaper gauge could not be calibrated. Was hoping that accuracy could be verified but it failed.
Date published: 2017-08-24
What is the weight of one of these gauges? I am looking specifically at PGM-100B-6000PSI and PGM-100B-40Bar
Thank you for your inquiry. These weigh less than 5 lbs.
Date published: 2023-10-09
Does this gauge (and other gauges you sell) come with a calibration certificate? If not, can I purchase this separately?
Gene, these are low cost OEM gauges, these will not come with calibration, and we do not have the ability to calibrate them.
Date published: 2024-12-06
How do you calibrate zero? My gauge came in and it as well below zero.
The zero offset may caused buy an imbalance between the internal pressure inside the gauge and the outside pressure. You can try "burping" the gauge by momentarily removing the rubber plug on the top of the gauge. There is no mechanical adjustment procedure for these gauges
Date published: 2020-07-15
Hi, I have 12 of these gauges and would like to fill them with oil. Do you have oil that we can buy to fill them with? How much would I need to complete this job?
We do not sell the fill oils for the gauges. You can use glycerin, silicone oil or mineral oil to fill them. All should be fairly easy to locate. You should leave a small air space of approximately a 1/4 inch from the top of gauge when you fill them
Date published: 2020-08-26