Welcome to our new website, found an issue or bug? Please report it here
IEFB-HN-CND-R10-LCD
IEFB-HN-CND-R10-LCD INSERTION ELECTROMAGNETIC ENERGY SYSTEM WITH DISPLAY NPT PROCESS CONNECTIONS, CONDUIT CONNECTION
Choose a Variant
Electrical Connection
Temperature Probe Style
Data Interface
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 1 % RDG |
| Accuracy Note | High accuracy 4 to 10˝ (100 to 250 mm) pipe; 1% of reading, High accuracy units: ± 0.5% of reading at calibrated velocity, ± 1% of reading from 2 to 20 ft/s (0.6 to 6 m/s) ± 0.02 ft/s (± 0.006 m/s) at < 2 ft/s (0.6 m/s); Standard accuracy units: ± 1% FS |
| Compliance | BTL |
| Conductivity | > 20 µS/cm |
| Control Output | Alarm |
| Data Interface | N/A |
| Display Note | 2 x 2" (50 x 50 mm) Graphic LCD with Backlight |
| Display Size | 71 mm (2.8 in) |
| Display Type | LCD |
| Electrical Connection | 1/2 in NPT female Conduit with Screw Terminal block |
| Enclosure Ratings | IP66, NEMA Type 4X |
| External Probe Lead Length | 3 m (10 ft) |
| Impedance | 4 to 20 mA: 536 Ω; 5V: 500 Ω; 10V: 1.27k Ω |
| Linear Flow Rate, Max | 20 ft/s |
| Linear Flow Rate, Min | 0 ft/s |
| Materials | Aluminum |
| Materials, Wetted | Polymer, Silicone, Stainless Steel |
| Media Compatibility | Acid Solutions, Conductive Liquids, Saltwater |
| Operating Temperature, Max | 158 °F |
| Operating Temperature, Min | -4 °F |
| Output Detail | (1) Analog: 4-20 mA, 0-5 V, 0-10 V or 2-10 V (display selectable); (1) Pulse/Frequency: 0-15 V peak pulse, 0 to 500 Hz or scalable pulse output (display selectable); (2) Alarm: (1) Empty pipe detection or minimum/maximum velocity, (display selectable); (1) Reverse flow output indication |
| Output Signal | Current, Voltage, DC Pulse |
| Pipe Size, Max | 10 in |
| Pipe Size, Min | 4 in |
| Pressure Drop Note | < 0.1 psi at 12 ft/s in 4" (<0.01 bar at 3.7 m/s in 100 mm) and Larger Pipe |
| Pressure Drop, Max | 0.1 psi |
| Pressure Limits | Up to 400 psi |
| Process Connection Size | 1 in |
| Process Connection Type | NPT Male |
| Process Temperature, Max | 250 °F |
| Process Temperature, Min | 15 °F |
| Relative Humidity | 10 to 90% Non-Condensing |
| Resistance Note | Matched 4 Wire Platinum RTD’s |
| Storage Temperature, Max | 185 °F |
| Storage Temperature, Min | -40 °F |
| Straight Run Requirements | >10 Diameter Upstream, >5 Diameter Downstream |
| Supply Power Note | 12 to 42 Vdc, 0.25 A @ 24 Vdc; 12 to 36 Vac |
| Supply Power Type | AC/DC |
| Supply Voltage | 12 to 42 Vdc, 12 to 36 Vac |
| Temperature Compensation | 140 to 220°F < 2% error over ± 30°F Change , 40 to 70°F < 2% error over ± 10°F Change |
| Temperature Probe Style | General Purpose Probe with Thermowell |
| Temperature Sensor Type | RTD |
| See All Specs | |
Show Ratings & Reviews