1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
CS060-Series
Touch-Safe Enclosure Heater 50 to 150 W
- Low Surface Temperature
- Quick Mounting Due to DIN Rail Mountable
- Double Insulated (Plastic)
- Wide Voltage Range
CS060-Series
From
$
118.21
Product Overview
- Electrical Connection Screw Terminal
- Enclosure Ratings IP20, NEMA Type 2
- Fitting position Vertical
- Form factor DIN Clip for 35 mm
- Heating Element Material PTC resistor
- Housing Material Plastic
- Operating Temperature, Min -20 °C
- Protection II (Double insulated)
- Storage Temperature, Max 70 °C
- Storage Temperature, Min -45 °C
- Supply Voltage 120 to 240 Vac/Vdc
- Surface Temperature Note <80°C (176°F), except upper protective grille
- Width 60 mm
- Wire Gauge 16 AWG
Touch-safe heater for the use in enclosures with electrical/electronic components. The design of the heater supports the natural convection which results in a high aircurrent of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and hygrostats can directly be connected to the heater CS060. This heater is also available in a version with plug-in thermostat requiring no additional wiring (CSF060). Both versions are designed for permanent operation.
SPECIFICATIONS
Operating Voltage: 120 to 240 Vac/Vdc* (min 110V, max 265V)
Heating Capacity: See table
Heating Element: PTC resistor: temperature limiting
Surface Temperature: <80°C (176°F), except upper protective grille
Connection: 4-pole terminal 2.5 mm2 (1.0 in2), torque 0.8 Nm max
Casing: Plastic according to UL94 V-0, black
Mounting: Clip for 35 mm (1.4") DIN rail, EN 50022
Fitting Position: Vertical
Operating/Storage Temperature: -45 to 70°C (-49 to 158°F)
Protection Type/Protection Class: NEMA 2 (IP20)/II (double insulated)
Approvals: VDE + UL File No. E150057 (according to UL499 in combination with UL508A)
Note: Other voltages on request
* Operating with voltages below 140 Vac/Vdc reduces heating performance by approximately 10%.
SPECIFICATIONS
Operating Voltage: 120 to 240 Vac/Vdc* (min 110V, max 265V)
Heating Capacity: See table
Heating Element: PTC resistor: temperature limiting
Surface Temperature: <80°C (176°F), except upper protective grille
Connection: 4-pole terminal 2.5 mm2 (1.0 in2), torque 0.8 Nm max
Casing: Plastic according to UL94 V-0, black
Mounting: Clip for 35 mm (1.4") DIN rail, EN 50022
Fitting Position: Vertical
Operating/Storage Temperature: -45 to 70°C (-49 to 158°F)
Protection Type/Protection Class: NEMA 2 (IP20)/II (double insulated)
Approvals: VDE + UL File No. E150057 (according to UL499 in combination with UL508A)
Note: Other voltages on request
* Operating with voltages below 140 Vac/Vdc reduces heating performance by approximately 10%.
PDFs & Manuals
