1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
CSF060-Series
Touch-Safe Enclosure Heater with Thermostat 50 to 150 W
Models In Stock
- Low Surface Temperature
- Integrated Thermostat
- Quick Mounting Due to DIN Clip
- Double Insulated (Plastic)
CSF060-Series
From
$
123.87
Models In Stock
Product Overview
- Electrical Connection Screw Terminal
- Enclosure Ratings IP20, NEMA Type 2
- Fitting position Vertical
- Form factor DIN Clip for 35 mm
- Heating Element Material PTC resistor
- Housing Material Plastic
- Current, Max 2.5 A
- Operating Temperature, Min -40 °C
- Protection II (Double insulated)
- Starting Temperature 5 °C
- Storage Temperature, Max 70 °C
- Storage Temperature, Min -45 °C
- Supply Voltage 120/240 Vac
- Surface Temperature Note <80°C (176°F), except upper protective grille
- Switch-Off Temperature 15 °C
- Width 60 mm
- Wire Gauge 16 AWG
Touch-safe heater for the use in enclosures with electrical/electronic components. The design of the heater supports the natural convection which results in a high aircurrent of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. This model with plug-in thermostat does not require additional wiring. The heaters are designed for permanent operation. This heater is also available in a version without thermostat (CS 060).
SPECIFICATIONS
Operating Voltage: 120 to 240 Vac* (min 110V, max 265V)
Heating Capacity: See table
Heating Element: PTC resistor: temperature limiting
Surface Temperature: <80 °C (176 °F), except upper protective grille
Connection: 4-pole terminal 2.5 mm2, (0.10 in2) torque 0.8 Nm max
Casing: Plastic according to UL94 V-0, black
Mounting: Clip for 35 mm (1.4") DIN rail, EN 50022
Fitting Position: Vertical
Temperature
Operating: -40 to 70 °C (-40 to 158 °F)
Storage: -45 to 70 °C (-49 to 158 °F)
Protection Type/Protection Class: NEMA 2 (IP20)/II (double insulated)
Approvals: VDE
Note: Other voltages on request
* Operating with voltages below 140 Vac/Vdc reduces heating performance by approximately 10%.
SPECIFICATIONS
Operating Voltage: 120 to 240 Vac* (min 110V, max 265V)
Heating Capacity: See table
Heating Element: PTC resistor: temperature limiting
Surface Temperature: <80 °C (176 °F), except upper protective grille
Connection: 4-pole terminal 2.5 mm2, (0.10 in2) torque 0.8 Nm max
Casing: Plastic according to UL94 V-0, black
Mounting: Clip for 35 mm (1.4") DIN rail, EN 50022
Fitting Position: Vertical
Temperature
Operating: -40 to 70 °C (-40 to 158 °F)
Storage: -45 to 70 °C (-49 to 158 °F)
Protection Type/Protection Class: NEMA 2 (IP20)/II (double insulated)
Approvals: VDE
Note: Other voltages on request
* Operating with voltages below 140 Vac/Vdc reduces heating performance by approximately 10%.
PDFs & Manuals
