1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
CSK060-SERIES
Touch-Safe Mini Enclosure Heater with Thermostat 10 W, 20 W
Models In Stock
- Low Surface Temperature
- Double Insulated (Plastic Housing)
- Wide Voltage Range
- Temperature Limiting
CSK060-SERIES
From
$
55.47
Models In Stock

Product Overview
- Electrical Connection Screw Terminal
- Enclosure Ratings IP20, NEMA Type 2
- Fitting position Vertical
- Form factor DIN Clip for 35 mm
- Heating Element Material PTC resistor
- Height 98 mm
- Housing Material Plastic
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -20 °C
- Surface Temperature, Max 85 °C
- Surface Temperature Note <85ºC (185ºF), (according to VDE 0100), except upper protective grille
- Width 75 mm
- Wire Gauge 16 AWG
Description
These heaters are used in enclosures wherecondensation is to be prevented or thetemperature may not fall below a minimumvalue. In this way corrosion is avoided andan even temperature is ensured. The heatersare designed for permanent operation.SPECIFICATIONS
Operating Voltage: 120 to 240 Vac/Vdc* (min 110V, max 265V)
Heating Element: PTC resistor: temperature limiting
Surface Temperature: <85 °C (185 °F), (according to VDE 0100), except upper protective grille
Connection: 2-pole terminal 2.5 mm2 (0.1"), torque 0.8 Nm max
Casing: Plastic according to UL94 V-0, black
Dimensions: 98 x 38 x 75 mm (3.9 x 1.5 x 3.0")
Mounting: Clip for 35 mm (1.4") DIN rail, EN 50022
Fitting Position:
Vertical Operating/Storage Temperature: -45 to 70 °C (-49 to 158 °F)
Protection Type/Protection Class: NEMA 2 (IP20)/II (double insulated)
Approvals: VDE + UL File No. E150057 (according to UL499 in combination with UL508A)
Note: Other voltages on request
* Operating with voltages below140 Vac/Vdc reduces heatingperformance by approximately 10%.