Welcome to our new website, found an issue or bug? Please report it here
PFTFS
Vacuum & Pressure Plate Feedthroughs for Sealing Wire & Cable
Models In Stock
- 2000 psi Pressure Rating
- 10-8 Torr Vacuum Rating
- Copper and Thermocouple Wire
- 8 Wire Pairs for 8 Thermocouples
PFTFS
From
$
1,055.22
Models In Stock
Product Overview
- Across Flats Jam NUT HEX 35.05 mm
- Fitting Model Plate
- Housing Flats 38.1 mm
- JAM NUT Thickness 10.41 mm
- Leak Rate Under Pressure 1 x 10⁻⁶ cc air/s at 2000 psi
- Leak Rate Under Vacuum less than 10^⁻⁸ cc He/s
- Length 35.56 mm
- Materials Stainless Steel, NBR
- Number of Wires 8
- O-Ring Face R 37.85 mm
- O-Ring, Max 121 mm
- O-Ring, Min 2 mm
- Out Gassing <0.003% VCM
- Out Gassing Note <0.003% VCM; <0.34% weight loss; sample at 125°C, cold surface at 25°C
- Pressure, Max 2000 psi
- Process Connection Size 1 1/16 in
- Process Connection Type UNF Male
- Process Temperature, Max 120 °C
- Process Temperature, Min -40 °C
- Thread Length 19.05 mm
- Vacuum Rating 1 x 10^-8 torr
- Wire Gauge 20 AWG
SPECIFICATIONS
Material: 300 series SS; nitrile O-ring
Maximum Pressure: 2000 psi
Leak Rates, Pressure: 1 x 10-6 cc air/s at 2000 psi; 1 X 10-7 cc air/s at 29 inHg vacuum
Vacuum Limit: 1 x 10-8 Torr
Leak Rates, Vacuum: 1 x 10-8 cc He/s at 15 psi; 1 X 10-8 cc He/s at 10-8 Torr
Temperature Limits: -40 to 250°F (-40 to 120°C)
Out Gassing: < 0.003% VCM; < 0.34% weight loss; sample at 125°C, surface at 25°C
Wire: 20 AWG solid with PFA insulation; 48 inL, -200 to 200°C rating
NOTE: The Face Seal is the High Pressure Side, the tightening nut is the low pressure side. Contact our Pressure Engineering Department for any questions about installation
Material: 300 series SS; nitrile O-ring
Maximum Pressure: 2000 psi
Leak Rates, Pressure: 1 x 10-6 cc air/s at 2000 psi; 1 X 10-7 cc air/s at 29 inHg vacuum
Vacuum Limit: 1 x 10-8 Torr
Leak Rates, Vacuum: 1 x 10-8 cc He/s at 15 psi; 1 X 10-8 cc He/s at 10-8 Torr
Temperature Limits: -40 to 250°F (-40 to 120°C)
Out Gassing: < 0.003% VCM; < 0.34% weight loss; sample at 125°C, surface at 25°C
Wire: 20 AWG solid with PFA insulation; 48 inL, -200 to 200°C rating
NOTE: The Face Seal is the High Pressure Side, the tightening nut is the low pressure side. Contact our Pressure Engineering Department for any questions about installation
