1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
OM-CP-WIND101A-KIT-Series
Wind Speed Data Logger, Part of the NOMAD® Family
Models In Stock
- Durable Housing for Logger
- 3-Cup Anemometer
- 0 to 100 MPH (0 to 160 KPH) Range
- 0.085 MPH Resolution at a 10 Second Sampling Rate
OM-CP-WIND101A-KIT-Series
From
$
576.74
Models In Stock
Product Overview
- Accuracy ± 2.5 %
- Accuracy Detail ±2.0 mph from 0 to 10 mph; ±2.5% of reading from >10 to 100 mph
- Anemometer Dimensions 2.1" H x 7.5" D
- Battery life up to 10 yr
- Battery Size and Type 3.6V Li-ion
- Baud Rate 115200
- Data Interface USB
- Data Retention Start and Stop the device multiple times without having to download data or communicate with a PC. Activation: To Start the Device: Press and hold the Pushbutton for 5 seconds, the Green LED will flash During this time; the device has Started Logging
- Display Measuring Units knot, KPH, m/s, mph
- Enclosure Ratings IP65, NEMA Type 4
- Height 1.5 in
- Housing Depth 0.9 in
- Housing Height 3.7 in
- Housing Width 2.5 in
- Indicator Type Red LED, Green LED
- Length 2.9 in
- Materials ABS
- Measurement Range Note Starting Threshold: 1.75 mph
- Measurement Type Wind Speed mph
- Measuring Range 0 to 100 mph
- Memory 500,000 readings
- Memory Modes Yes
- Memory Note 500,000 readings; software configurable memory wrap 250,000 readings multiple start/stop
- Number of Measurements 1
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -20 °C
- Programmable Functions Security
- Real Time Recording The device may be used with PC to monitor and record data Real-time
- Relative Humidity 0 to 100% RH non-condensing
- Resolution Measurement: 0.085 mph
- Resolution Note 0.085 mph at 10 Second Readingterval
- Sampling Rate 1 Hz (1 update/second)
- Sampling Rate Note 1 Second to 24 hours
- Sensor Type 3-cup anemometer
- Software XP SP3/Vista/7 and 8
- Start Modes Delayed Start, Immediate Start, Push-button
- Stop Modes Adjustable Delay Stop, Manual Through Software
- Supply Power Type Battery
- Temperature Note Operating Environment: -20 to 60ºC, Anemometer Operating Environment: -55 to 60ºC
- Time Accuracy ±1 minute/ month at 20ºC (68ºF), stand alone data logging
- USB Cable Length 6 ft
- Weight 513 g
- Width 5.8 in
The OM-CP-WIND101A is a complete system to accurately measure and record wind speed. This low cost wind speed recording system comes complete with a data logger, weatherproof enclosure, a three-cup anemometer and all the necessary cabling to quickly get up-and-running.
The logger can record up to 500,000 readings and the storage medium is non-volatile, solid state memory, providing maximum data security even if the battery becomes discharged. The small size of these devices allows them to fit almost anywhere.
The device can be started and stopped directly from a computer using our user-friendly software. Data retrieval is simple. Simply plug it into an available USB port and our user-friendly software does the rest. The software converts a PC into a real-time strip chart recorder. Data can be printed in graphical and tabular format or exported to a text or Microsoft Excel® file. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged.
Specifications
Measurement Range: 0 to 100 mph (0 to 45 m/s)
Resolution: 0.085 mph at 10 second reading interval
Accuracy: ±2.0 mph from 0 to 10 mph; ±2.5% of reading from >10 to 100 mph
Starting Threshold: 1.75 mph
Reading Rate: 1 reading every second to 1 every 24 hours
Memory: 500,000 readings; software configurable memory wrap 250,000 readings in multiple start/stop
Memory Wrap Around: Yes
Start Modes: Immediate start, delay start up to 18 months, multiple pushbutton start/stop
Stop Modes: Manual through software, timed (specific date and time)
Multiple Start/Stop Mode: Start and stop the device multiple times without having to
download data or communicate with a PC
Multiple Start/Stop Mode Activation:
To Start the Device:
Press and hold the pushbutton for 5 seconds, the green LED will flash during this time;
the device has started logging
To Stop the Device:
Press and hold the pushbutton for 5 seconds, the red LED will flash during this time.
The device has stopped logging.
Real Time Recording: The device may be used with PC to monitor and record data in real-time
LED Functionality:
Green LED Blinks: 10 second rate to indicate logging; 15 second rate to indicate delay start
Red LED Blinks: 10 second rate to indicate low battery and/or full memory;
1 second rate to indicate an alarm condition
Password Protection: An optional password may be programmed into the device
to restrict access to configuration options. Data may be read out without the password
Engineering Units: MPH, KPH, M/S, KNOTS (software selectable)
Battery Type: 3.6V lithium battery (included); user replaceable
Battery Life: 10 years typical, dependent upon frequency and duty cycle
Time Accuracy: ±1 minute/month at 20 ºC (68 ºF), stand alone data logging
Computer Interface: USB (interface cable required); 115,200 baud
Software: XP SP3/Vista/7 and 8 (32 and 64-bit)
Anemometer Operating Environment: -55 to 60 ºC (-67 to 150 ºF); 0 to 100%RH
Operating Environment: -20 to 60 ºC (-4 to 150 ºF), 0 to 100% RH non-condensing
IP Rating: IP65
Anemometer Dimensions: 54 H x 192 mm D (2.1 x 7.5')
Dimensions:
Data Logger:
74 H x 148 W x 39 mm D (2.9 x 5.8 x 1.5')
Enclosure:
93 H x 62 W x 24 mm D (3.7 x 2.5 x 0.9')
Weight: 513 g (18.1 oz)
Material: ABS plastic
The logger can record up to 500,000 readings and the storage medium is non-volatile, solid state memory, providing maximum data security even if the battery becomes discharged. The small size of these devices allows them to fit almost anywhere.
The device can be started and stopped directly from a computer using our user-friendly software. Data retrieval is simple. Simply plug it into an available USB port and our user-friendly software does the rest. The software converts a PC into a real-time strip chart recorder. Data can be printed in graphical and tabular format or exported to a text or Microsoft Excel® file. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged.
Specifications
Measurement Range: 0 to 100 mph (0 to 45 m/s)
Resolution: 0.085 mph at 10 second reading interval
Accuracy: ±2.0 mph from 0 to 10 mph; ±2.5% of reading from >10 to 100 mph
Starting Threshold: 1.75 mph
Reading Rate: 1 reading every second to 1 every 24 hours
Memory: 500,000 readings; software configurable memory wrap 250,000 readings in multiple start/stop
Memory Wrap Around: Yes
Start Modes: Immediate start, delay start up to 18 months, multiple pushbutton start/stop
Stop Modes: Manual through software, timed (specific date and time)
Multiple Start/Stop Mode: Start and stop the device multiple times without having to
download data or communicate with a PC
Multiple Start/Stop Mode Activation:
To Start the Device:
Press and hold the pushbutton for 5 seconds, the green LED will flash during this time;
the device has started logging
To Stop the Device:
Press and hold the pushbutton for 5 seconds, the red LED will flash during this time.
The device has stopped logging.
Real Time Recording: The device may be used with PC to monitor and record data in real-time
LED Functionality:
Green LED Blinks: 10 second rate to indicate logging; 15 second rate to indicate delay start
Red LED Blinks: 10 second rate to indicate low battery and/or full memory;
1 second rate to indicate an alarm condition
Password Protection: An optional password may be programmed into the device
to restrict access to configuration options. Data may be read out without the password
Engineering Units: MPH, KPH, M/S, KNOTS (software selectable)
Battery Type: 3.6V lithium battery (included); user replaceable
Battery Life: 10 years typical, dependent upon frequency and duty cycle
Time Accuracy: ±1 minute/month at 20 ºC (68 ºF), stand alone data logging
Computer Interface: USB (interface cable required); 115,200 baud
Software: XP SP3/Vista/7 and 8 (32 and 64-bit)
Anemometer Operating Environment: -55 to 60 ºC (-67 to 150 ºF); 0 to 100%RH
Operating Environment: -20 to 60 ºC (-4 to 150 ºF), 0 to 100% RH non-condensing
IP Rating: IP65
Anemometer Dimensions: 54 H x 192 mm D (2.1 x 7.5')
Dimensions:
Data Logger:
74 H x 148 W x 39 mm D (2.9 x 5.8 x 1.5')
Enclosure:
93 H x 62 W x 24 mm D (3.7 x 2.5 x 0.9')
Weight: 513 g (18.1 oz)
Material: ABS plastic
Software & Drivers
Show Ratings & Reviews
I have the wind speed data logger, how do we convert wind speed from pulses to KM/h thanks
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM”
Date published: 2022-01-11