1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
Series-490W
Wireless Hydronic Differential Pressure Manometer for Valve Balancing & Testing
- Rugged weatherproof handheld housing withstands 1.0 meter drop test
- Wireless measurement of differential pressure, single pressure and fluid flow
- Wireless communication provides range up to 65 ft (19.8 m)
- The ergonomic design is much lighter and easier to work with, providing greater maneuverability and quick install setup
Series-490W
From
$
4,009.45
Product Overview
- Accuracy ± 2% of reading, ± 0.5 psi
- Battery Size and Type Alkaline AAA
- Compliance CE, FCC
- Display Measuring Units cm w.c., ft w.c., hPa, in w.c., kPa, mm w.c., Pa, psi
- Hysteresis ± 0.25% FS
- Materials, Wetted 316L Stainless Steel
- Media Compatibility Alcohols, Argon, Compatible Gases, Compatible Liquids, Nitrogen, Oils, Water
- Operating Temperature, Max 140 °F
- Operating Temperature, Min 32 °F
- Pressure, Max 200 psi
- Pressure, Min 0 psi
- Pressure Type Differential
- Process Connection Size 1/4 in
- Process Connection Type NPT Male
- Process Temperature, Max 185 °F
- Process Temperature, Min -4 °F
- Proof Pressure Up to 400 psi
- Supply Power Note 2x AAA batteries (each sensor), user replaceable
- Supply Power Type Battery
- Supported Devices UHH6 and newer, and smart devices with Bluetooth® v5.0 and Bluetooth® Low Energy (LE) wireless technology, Android® firmware version 8.0 and above
- Weight 5 lb
- Wireless Range Up to 65 ft
The Series 490W Wireless Hydronic Differential Pressure Manometer is the most accurate and easy to operate manometer on the market. By using wireless transducers and a mobile device, a single operator can monitor and balance a hydronic system in less time than traditional hydronic balancers. The Series 490W transducers connect wirelessly to a UHH6 or newer handheld device, or your own mobile device, to monitor differential pressure and flow on up to three different valves. Being wireless, there are no hoses to carry, snag on equipment or needing to be drained. The 490W utilizes Dwyer’s hydronic application software that contains valve charts for numerous manufacturers, which converts differential pressure to flow directly on the screen.
Download the Dwyer Hydronic App for Android® mobile devices to connect to the Series 490W.
490W HKIT includes:
- Pressure transducers (2 per kit) with case
- Installation and operating manual (IOM)
- 1/4" SAE 45° x 1/4" female NPT straight adapter (2 per kit)
- 1/4" female NPT x 1/4" male NPT elbow fitting (2 per kit)
- Piercing gauge adapters (2 per size/6 per kit) - 1/8" dia x 1-1/2" length; 1/8" dia x 3" length; 1/16" x 1-1/2" length
- 1/4˝ female NPT x 1/4˝ quick connect coupler (2 per kit)
- 4 pack AAA batteries
- 490W hard carrying case
California Residents: Click Here for Proposition 65 WARNING.
Product Applications
- Refrigerant pressure testing
- Hydronic valve balancing
- Measure pressure drop across pumps
- Measure pressure drop across chiller and coils for freeze protection
PDFs & Manuals