Accessories

Remote test, reset, and alarm indication accessories for duct smoke detector applications.

Remote alarm and test accessories for duct smoke detectors and monitoring devices.

Audible/Visual Alarms for Gas Detection provide clear alerts with sound and light to ensure safety and monitor equipment status effectively.

The Macurco DMK-1 is an airtight enclosure that provides a means to mount any Macurco gas detector to an air duct. By duct mounting a Macurco gas detector, it is able to monitor the air inside of the duct and provide early detection of your target gas moving through the HVAC system. The DMK-1 used with Macurco gas detectors can provide automatic control to prevent the recirculation of these gases into additional areas by the air handling systems, fans, and blowers in commercial and residential applications.

Litestack Audible/Visual Alarms provide clear gas detection alerts with both sound and light, ensuring safety and equipment status visibility.

Macurco recommends testing and calibration at a least once per year at a minimum but depending on the application and risk potential of the application a greater frequency might be needed.

Macurco's 24V AC-DC power supply series offers flexible, reliable power options for standalone or multi-point gas detection systems.

The Macurco Notification series is designed for spaces requiring distinctive visual or audible signals. The family comprises horn-only, strobe-only, or combination horn/strobe. These devices use low current to provide a high decibel output and can be easily seen and heard from afar. The product offering works well with Macurco products, including the Macurco control panels and the Macurco 6 & 12 Series detectors. This notification device can be flush or surface mounted on a standard 4” x 4” electrical box.

The Macurco On / Auto Switch is a remote manual switch used to manually engage ventilation in the event of an emergency, during maintenance, or to add additional ventilation in a non-emergency situation. This switch is to be wired in parallel to the gas detection system. This device is to be used in conjunction with Macurco solutions to aid in the safety of people and property.

Gas Calibration Kit series offers reliable calibration gases for accurate and consistent gas detection and measurement.

The Macurco WHK-1 is a weatherproof enclosure that provides means to protection-mount all Macurco 6-Series gas detectors in non-hazardous locations. By weatherproofing a gas detector, the unit is able to monitor gas concentrations while being protected from falling debris and indirect spray. This housing is not suitable for direct spray or excessive amounts of debris. The Macurco WHK-1 is designed with sufficient airflow for effective gas detection through multiple vent plugs.

OXY-LC board powers and controls zirconium dioxide oxygen sensors with built-in pressure compensation and easy, secure wiring terminals.

The Macurco E-Stop button is a remote button used to disengage power in the event of an emergency. This shutdown can be used to shut down gas valves or boiler systems. This device is to be used in conjunction with Macurco solutions to aid in the safety of people and property.

Replacement Smart Sensor offers reliable performance and easy installation for your smart devices, ensuring seamless connectivity and accurate sensing.

Macurco recommends testing and calibration at a least once per year at a minimum but depending on the application and risk potential of the application a greater frequency might be needed.

The HS-Sync module works in conjunction with the Macurco horn and strobe series to synchronize multiple strobes per ADA & NFPA.

The Macurco Notification series is designed for spaces requiring distinctive visual or audible signals. The family comprises horn-only, strobe-only, or combination horn/strobe. These devices use low current to provide a high decibel output and can be easily seen and heard from afar. The product offering works well with Macurco products, including the Macurco control panels and the Macurco 6 & 12 Series detectors. This notification device can be flush or surface mounted on a standard 4” x 4” electrical box.

The Macurco Outdoor-Rated Multi-Colored LED Horn & Strobe is a highly versatile notification appliance designed for reliable performance in demanding environments. Housed in a rugged NEMA 4X/IP66 polycarbonate enclosure, this low-voltage device delivers both audible and visual alerts with customizable signaling options. With selectable LED colors, multiple light modes (flash, blink, continuous, rotate), and over 70 tone combinations with adjustable sound levels, the unit adapts seamlessly to a wide range of safety applications. Fully compatible with Macurco control panels and 6 & 12 Series detectors, it offers flexible mounting configurations and dependable operation for critical gas detection and alarm systems.

Power supplies designed for Macurco gas monitors, offering four 24 VDC outputs with reliable hardwired connections. Made in America.