1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
Series-IEF
Electromagnetic Flow Transmitter for 4-36" Pipes, Adjustable Installation
Models In Stock
- Meet application requirements with field configurable setup displays (-LCD integral option or remote accessory A-IEF-DSP), which accommodate a variety of application configurations with one model through multiple display configurations i.e. pipe size, pipe material, liquid type, analog output, pulse/frequency output, alarm outputs, communication outputs, damping, and calibration factor
- Maintain system efficiency with high performance accuracy that is maintained through changes in temperature, density or viscosity
- Quick and easy ordering and set up with Setup Wizard and installation tool that are simple to use and allow for precise installation
- Save time with accessory setup kit A-IEF-KIT that ensures exact installation application depth with included thickness gage and measuring tape
- Reduced costs, long product life, and minimal maintenance requirements with no moving parts to wear or break and electrodes that discourage fouling
- Minimize installation costs with isolation valve accessory options to allow for installation in operational systems via hot-tap kit or easy removal without system downtime
- Required documents included with NIST traceable pass/fail verification certificate included standard for Carbon Steel Schedule 40 pipes sized 4" (102 mm), 6" (150 mm), 8" (200 mm)
Series-IEF
From
$
2,697.90
Models In Stock
Can't find the right model?
Use our custom configurator to fine tune your product
Product Overview
- Accuracy ± 1 %
- Applications Agricultural & Hydroponics Applications, Boilers, Chemical Refineries, Chemicals, Fluid Measurement and Control, Oil, Pump Control, Water Quality Monitoring
- Compliance BTL, CE
- Conductivity > 20 µS/cm
- Control Output Alarm
- Display Range 0 to 100% Glycol Display Selectable
- Linear Flow Rate, Max 20 ft/s
- Linear Flow Rate, Min 0 ft/s
- Materials Aluminum
- Materials, Wetted Polymer, Silicon, Stainless Steel
- Media Compatibility Acid Solutions, Conductive Liquids, Saltwater
- Operating Temperature, Max 160 °F
- Operating Temperature, Min -20 °F
- Output Detail (1) Analog: 4-20 mA, 0-5 V, 0-10 V or 2-10 V (display selectable); (1) Pulse/Frequency: 0-15 V peak pulse, 0 to 500 Hz or scalable pulse output (display selectable); (2) Alarm: (1) Empty pipe detection or minimum/maximum velocity, (display selectable); (1) Reverse flow output indication
- Output Signal Current, Voltage, DC Pulse
- Pressure Drop, Max 0.1 psi
- Pressure Drop Note < 0.1 psi at 12 ft/s in 4" (101.6 mm) and Larger Pipe
- Pressure Limits Up to 400 psi
- Process Connection Size 1 in
- Process Temperature, Max 250 °F
- Process Temperature, Min 15 °F
- Storage Temperature, Max 185 °F
- Storage Temperature, Min -40 °F
- Straight Run Requirements >10 Diameter Upstream, >5 Diameter Downstream
- Supply Power Type AC/DC
- Supply Voltage 12 to 42.4 Vdc, 0.25 A @ 24 Vdc; 12 to 36 Vac
A-IEF Remote Display is NOW AVAILABLE!
The Series IEF Insertion Electromagnetic Flow Transmitter is an adjustable insertion flowmeter featuring electromagnetic technology that accurately and reliably measures fluid velocity in addition to providing several continuous signal outputs. This series is specifically designed to offer superior performance paired with simple installation and use. One unit is adjustable to fit pipe sizes from 4 to 36" (102 to 914 mm), and offers several output options including selectable BACnet MS/TP or Modbus® RTU communications protocol over 2-wire RS-485 in addition to the standard analog, frequency and alarm outputs.
Product Applications
- Boiler feed water
- Chilled water
- Open and closed loop condenser water
- Irrigation system
- Process and coolant flow
- Ground water remediation
- Chemical processing
- Pump protection
- Wastewater
- Mining
Accessories
accessories
Installation guide/alignment kit, includes: alignment scale body, 2 rods and 2 thumbscrews.
$181.85
0 In Stock
Set up kit, includes: set up display, measuring tape, universal power adapter for high accuracy installation and UTG thickness gage.
$1,783.15
0 In Stock
Lock-out kit, includes: 4 specialty through hole screws for tamper evident locking of the display.
$54.85
0 In Stock
Meter tag, clear envelope tag for adding field configured information to unit.
$18.45
0 In Stock
1-1/4 in full port isolation valve brass kit. (Brass valves are non-RoHS compliant.)
$433.90
61 In Stock
Isolation valve kit, incl carbon steel 1 in to 1-1/4 in BSPT bushing, BSPT valve, BSPT threaded nipple with a BSPT threadolet, all brass. (Brass valves are non-RoHS compliant.)
$442.00
0 In Stock
Isolation valve kit, includes 316SS 1 in to 1-1/4 in BSPT bushing, 316SS BSPT valve, 316SS BSPT threaded nipple with a 316SS BSPT threadolet.
$865.00
3 In Stock
cables
consumables
meters/controllers
Show Ratings & Reviews
