Welcome to our new website, found an issue or bug? Please report it here
CNP-Series
1/16 and 1/8 DIN Vertical Plastics Extrusion Process Controllers
This product series is no longer available. For potential replacements please see CNI-Series , CN400-Series , or CN-4000-Series Please consult an application engineer for a more specific recommendation.
- Simple to Operate, Preconfigured for Extrusion Applications
- Universal Input
- Selectable Controller or Indicator Modes
- Heat Only or Heat Cool Control Type
CNP-Series
From
C$
279.00
Product Overview
- Accuracy ± 0.1 %
- Accuracy Note ±0.1% of input range ±1 LSD (T/C CJC better than 1°C)
- Additional Features 1 Low Voltage Power
- Approvals CE, UL and ULC recognized
- Auto/Manual Selectable From front panel with bumpless transfer
- Control Characteristics Enable control ON/OFF selectable from front keypad
- Control Mode PID Control, On-off control
- Control Output SPDT Relay, Alarm
- Data Interface RS485
- Data Interface Note 2-wire RS485, 1200 to 19,200 Baud, Modbus
- Depth Behind Panel 100 mm
- Display Type 4 Digit LED
- Enclosure Ratings IP20, IP66
- Front Panel Dimensions 96 x 48 mm
- Impedance Input >10Ω for thermocouple and mV ranges, 47Ω for V ranges and 5Ω for mA ranges
- Input Type Thermocouple, RTD, mA, Voltage
- Input Type Note Thermocouple J, K, C, R, S, T, B, L, N and PtRh 20% vs PtRh 40% RTD 3 Wire PT100: 50Ω per lead maximum (balanced)
- Keypad 4 button operation with LED display and indicators
- Measurement Type Current, Temperature, Voltage
- Number of Control Outputs 3
- Number of Inputs 1
- Operating Temperature, Max 55 °C
- Operating Temperature, Min 0 °C
- Output Configurations Up to 3
- Output Detail 1 DC pulse, 2 SPDT 2A relay outputs;Control and Alarm Relays: Contacts SPDT 2 amp resistive at 240 Vac, >500,000 operations Output Configuration: up to 3 possible outputs for control and alarms. Control SSR Driver Outputs: >10 Vdc in 500 minimum drive capability Triac Outputs: 0.01 to 1 amp AC, 20 to 280 Vrms, 47 to 63 Hz Alarm Output: Process high, process low, SP deviation, band, logical or/and; also 1 loop alarm for process control security; process alarms have adjustable hysteresis
- Output Signal DC Pulse
- Relative Humidity 20 to 95%
- RTD Type 100 Ω Pt Sensor
- Sampling Rate 4 Hz (4 updates/second)
- Sampling Rate Note 4 per second, 14 bit resolution approximately
- Sensor Break Detection < 2 seconds (except zero based DC ranges), control O/P's turn off, high alarms activate for T/C and mV ranges, low alarms activate for RTD, mA or V ranges
- Storage Temperature, Max 80 °C
- Storage Temperature, Min -20 °C
- Supply Power Note 100 to 240 V, 50/60 Hz, 7.5 VA, 20 to 48 Vac 7.5 VA/22 to 65 Vdc, 5W
- Supply Power Type AC
- Supply Voltage 100 to 240 Vac
- Thermocouple Type None
- Weight 0.21 kg
Description
With plastic extruder specific settings, the OMEGA CNP Series temperature controllers are an economic solution to precision temperature control of extruders. Reduce inventory—single device for heat only, heat/cool control and indicator. Fast configuration and and default parameters to fit the selected mode. With two package sizes and multiple output configurations,the controllers are suitable for twin and single screw extruders, both for heat only die and adapter zones, and heat/cool for barrel zones. The controllers can also be used in an indicator only mode, allowing one instrument to be used for all applications. With three default parameter settings for indicator, heat and heat/cool modes, the Omega CNP Series controllers offers the ultimate in flexibility for the control of industrial plastic extruders.
PDFs & Manuals
