Duct and Enclosure Heaters

316 Stainless Steel duct heaters installed inline that go up to 1000°F and 0.75 kW of power. Made for drying, laminating, packaging and other similar applications.

316 stainless steel duct heaters designed for low flow air, gas, water or aqueous solutions installed inline that go up to 800°F and 1.2 kW of power.

The Low Inrush Current Enclosure Heaters are available up to 65W optimized for a low inrush current, and operates up to 70°C with a plastic heat guard.

The Touch-Safe Enclosure Heater is offered up to 150W featuring a low surface temperature due to its double insulated construction, and a built-in thermostat.

The Natural Convection Enclosure Heater is available up to 100W and rated up to 200°C using PTC heater technology with no switching components.

The Compact Enclosure Fan Heaters offer a high power output (60 to 230W) relative to their size using a PTC heating element, and can operate up to 70°C.

High airflow nickel chrome cross frame element duct heaters installed via flange fitting that go up to 600°F and 2 kW of power. Used with blowers for recirculating air.

The Touch-Safe Enclosure Heater is offered as 10 and 20W and has a low surface temperature due to its double insulated construction, and a built-in thermostat.

The Silicone Rubber Enclosure Heaters are offered up to 250 W with or without an included thermostat, and are vulcanized to an aluminum plate for installation.

The Compact Enclosure Fan Heaters offer a high power output (10 to 40W) relative to their size using a PTC heating element, and can operate up to 70°C.

The Vertical Compact Fan Heaters offer a high power output (100 to 400W) relative to their size using a PTC heating element, and can operate up to 45°C.

The Compact Enclosure Fan Heaters offer a high power output (300 to 800W) relative to their size using a PTC heating element, and can operate up to 50°C.

The Surface Spot Heaters are ideal for single component, compact heating up to 13W, while being able to operate up to 70°C.

The 3 Mode Compact Fan Heater can operate at 200/300/400W with a compact design using a PTC heater, and can be used within control boxes or devices like ATMs.

The Touch-Safe Enclosure Heater is offered up to 150W, and has a low surface temperature due to its double insulated construction

The Silicone Rubber Enclosure Heaters are offered up to 120 W with or without an included thermostat, and are bonded to an aluminum plate for installation.

Slimline Lamp with On/Off Switch and Motion Sensor

Brass or stainless steel square duct heaters installed inline that go up to 440°F and 50 kW of power. Side terminal and bottom terminal options available.

The Miniature Semiconductor Enclosure heater is ideal for small enclosures with 13W and a wide range of supply voltages, and can operate up to 70°C.

High temperature incoloy tubular element duct heaters installed via flange that go up to 1200°F and 270 kW of power. For dehumidification, re-heating and heat treating.