Welcome to our new website, found an issue or bug? Please report it here
DPI8-DC
i-Series 1/32, 1/16, 1/8 DIN Programmable Temperature/Process Meters with RS232 & RS485 Communications
Choose a Variant
Data Interface
Form factor
Retransmission Output
Supply Voltage
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$569.06 |
| 10-24 | C$540.61 |
| 25-49 | C$512.15 |
| 50-99 | C$483.70 |
| 100-499 | C$455.25 |
| 500+ | C$426.80 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| A/D Conversion | Dual slope |
| Accuracy | ± 0.5 °C |
| Accuracy Note | ±0.5°C temp nominal; 0.03% rdg ±0.03% range process and strain (@25 °C );"Universal Temperature/Process Input Models;Thermocouple Accuracy:;Type J: 0.4°C (0.7°F);Type K: 1.0°C (1.8°F) and 0.4°C (0.7°F);Type T: 1.0°C (1.8°F) and 0.4°C (0.7°F);Type E: 1.0°C (1.8°F) and 0.4°C (0.7°F);Type R: 1.0°C (1.8°F) and 0.5°C (0.9°F);Type S: 1.0°C (1.8°F) and 0.5°C (0.9°F);Type B: 1.0°C (1.8°F) and 0.5°C (0.9°F);Type C: 0.4°C (0.7°F);Type N: -1.0°C (1.8°F) and 0.4°C (0.7°F);Type L: 0.4°C (0.7°F);RTD Accuracy;Pt, 0.00385, 100 ohm: ±0.5°C ±.02% rdg;Pt, 0.00385, 500 ohm: ±0.6°C ±.02% rdg;Pt, 0.00385, 1000 ohm: ±0.5°C ±.02% rdg;Pt, 0.00392, 100 ohm: ±0.5°C ±.02% rdg ;Pt, 0.00392, 500 ohm: ±0.5°C ±.02% rdg;(Nickel MIL-T-7990B) (FS required): 0.1°C (0.2°F);(Nickel MIL-T-7990B) (FS required): 0.3°C (0.5°F);Process Voltage Accuracy: 0.03% rdg;Process Current Accuracy: 0.03% rdg |
| Additional Features 1 | Programmable 3 Color Display |
| Approvals | UL, C-UL, UKCA, CE per 2014/35/EU |
| CMRR | 120 dB |
| Configuration | Single-ended |
| Control Action | Action: Reverse (heat) or direct (cool) |
| Control Output | SPDT Relay, Alarm |
| Cutout Dimensions | 45 mm |
| Data Interface | N/A |
| Decimal Selection | 3-Position |
| Digital Filter | Programmable |
| Display Range | -1999 to 9999 |
| Display Type | 4 Digit LED |
| Electrical Connection | Screw Terminal |
| Enclosure Ratings | NEMA Type 1 |
| Form factor | 1/8 DIN |
| Frequency | 50 to 400 Hz |
| Height | 48 mm |
| Impedance Input | 10 MΩ for 100 mV ;1 MΩ for 1 or 10 Vdc |
| Input Current | 0 to 20 mA (5 Ω load) |
| Input Type | Thermocouple, RTD, Voltage, Current |
| Input Voltage | 0 to 100 mV, 0 to 1V, 0 to 10 Vdc |
| Isolation | Power to Input/Output: 2300 Vac per 1 minute test For Low Voltage Power Option: 1500 Vac per 1 minute test Power to Relay/SSR Output: 2300 Vac per 1 minute test Relay/SSR to Relay/SSR Output: 2300 Vac per 1 minute test RS232/485 to Input/Output: 500 Vac per 1 minute test |
| Length | 127 mm |
| Linearization Points | Up to 10 |
| Measuring Range | Universal Temperature/Process Input Models;Thermocouple: Type J: -210 to 760 °C;Type K: -270 to -160 °C and -160 to 1372 °C;Type T: -270 to -190 °C and -190 to 400 °C;Type E: -270 to -220 °C and -220 to 1000 °C;Type R: -50 to 40 °C and 40 to 1768 °C;Type S: -50 to 100 °C and 100 to 1768 °C;Type B: 100 to 640 °C and 640 to 1820 °C;Type C: 0 to 2320 °C;Type N: -250 to -100 °C and -100 to 1300 °C;Type L: -200 to 900 °C;RTD;Pt, 0.00385, 100 ohm: -200 to 850 °C;Pt, 0.00385, 500 ohm: -200 to 850 °C;Pt, 0.00385, 1000 ohm: -200 to 850 °C;Pt, 0.00392, 100 ohm: -200 to 850 °C ;Pt, 0.00392, 500 ohm: -200 to 850 °C;(Nickel MIL-T-7990B) (FS required): 0 to 200 °C;(Nickel MIL-T-7990B) (FS required): -40 to 300 °C ;Process Voltage: 0 to 100 mV, 0 to 1V, +100 mV, 0 to 10V;Process Current: 0 to 20 mA (4 to 20 mA) |
| NMRR | 60 dB |
| Number of Inputs | 1 |
| Operating Temperature Note | 0 to 55°C (32 to 131°F) 90% RH non-condensing |
| Operating Temperature, Max | 55 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | Relay: 250 Vac or 30 Vdc @ 3 A (resistive load); configurable for on/off, PID, and ramp and soak Output 1: SPDT, can be configured as an alarm 1 output Output 2: SPDT, can be configured as an alarm 2 output SSR: 20 to 265 Vac @ 0.05 to 0.5 A (resistive load); continuous DC Pulse: Non-isolated; 10 Vdc @ 20 mA Analog Output (Output 1 Only): Non-isolated, proportional 0 to 10 Vdc or 0 to 20 mA; 500 Ω max Output 3 Retransmission Isolated Analog Voltage and Current Current: 10 V max @ 20 mA output Voltage: 20 mA max for 0 to 10 V output |
| Polarity | Unipolar |
| Reading Rate | 3/sec |
| Relative Humidity | 0.9 |
| Resolution | Temperature :1° /0.1° ; process : 10 µV |
| Retransmission Output | N/A |
| Sampling Rate | 3 Hz (3 updates/second) |
| Sensor/Transmitter Power | 24 Vdc @ 25 mA |
| Sensor/Transmitter Power Note | 5 Vdc @ 40 mA; 10 Vdc @ 60 mA (Optional In Place Of Communication) |
| Span Adjustment | 0.001 to 9999 counts |
| Step Response | 0.7 sec for 99.9% |
| Supply Power Note | 24 Vac**, 12 to 36 Vdc for DPi/CNi/DPiS/CNiS; 20 to 36 Vdc for dual display, ethernet and isolated analog output from qualified safety approved source |
| Supply Power Type | DC |
| Supply Voltage | 12 to 36 Vdc |
| Temperature Stability | RTD: 0.04°C/°C ;TC@ 25°C (77°F): 0.05°C/°C ;Cold Junction Compensation Process: 50 ppm/°C |
| Thermal Effects | -1999 to 9999 |
| Thermocouple Lead Resistance, Max | 100 Ω |
| Weight | 295 g |
| Width | 96 mm |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Rated 4 out of
5
by
bobb from
Good Product
Pleased with the product. Easy to program , preforms well.
Shipping is a little slow, and even though I ordered the product from Omega located in Connecticut, the product shipped from California, and had I known this I would have selected a different shipping method.
Date published: 2016-03-29
Rated 5 out of
5
by
jsulzer from
Cost effective and flexible!
Replaced a unit that was damaged due to lightning strike. First one worked for years until millions of volts decided to destroy it. GREAT tech support when the manual and menu was less than obvious.
Date published: 2016-05-23