Welcome to our new website, found an issue or bug? Please report it here
CN730-Series
1/4 DIN Temperature Controllers with Autotune, Alarms and RS485
Models In Stock
This product series currently has an extended lead time. For a potential replacement, please see the CN4000-Series or CNPT-Series
- Dual Display
- Autotune
- RS-485 Communications
- Free Software
CN730-Series
From
C$
241.47
Models In Stock
Product Overview
- Accuracy ± 0.25 %
- Accuracy Note ± 0.25% span, ± 1 least significant digit
- Cutout Dimensions 92 x 92 mm
- Data Interface RS485 Modbus
- Depth Behind Panel 79.2 mm
- Display Type 4 Digit LED
- Display Type Note Two 4-digit, 7-segment, LEDs PV: Red, 19 mm H (0.75") SV: Green, 12.7 mm H (0.5")
- Enclosure Ratings IP66
- Form factor 1/4 DIN
- Height 96 mm
- Input Type Thermocouple, RTD, Thermistor
- Length 15.8 mm
- Measurement Type Temperature
- Measuring Range Type B: 100 to 1800°C Type S: 0 to 1700°C Type R: 0 to 1700°C Type N: -200 to 1300°C Type E: 0 to 600°C Type T: -20 to 400°C and -200 to 400°C Type J: -20 to 400°C and -100 to 850°C Type K: -200 to 1300°C and -200 to 500°C Type L: -200 to 500°C Type U: -200 to 800°C Pt100Ω RTD: 0 to 100°C, -20 to 500°C, -200 to 600°C
- Memory Backup Non-Volatile
- Number of Control Outputs 1
- Number of Inputs 1
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Supply Power Note 100 to 240 Vac, 50/60 Hz
- Supply Power Type AC
- Supply Voltage 100 to 240 Vac
- Weight 425 g
- Width 96 mm
| Input Types | Range |
|---|---|
| Pt100Ω RTD | 0 to 100°C (32 to 212°F) -20 to 500°C (-4 to 932°F) -200 to 600°C (-328 to 1112°F) |
| B Thermocouple | 100 to 1800°C (212 to 3272°F) |
| S Thermocouple | 0 to 1700°C (32 to 3092°F) |
| R Thermocouple | 0 to 1700°C (32 to 3092°F) |
| N Thermocouple | -200 to 1300°C (-328 to 2372°F) |
| E Thermocouple | 0 to 600°C (32 to 1112°F) |
| T Thermocouple | -20 to 400°C (-4 to 752°F) -200 to 400°C (-328 to 752°F) |
| J Thermocouple | -20 to 400°C (-4 to 752°F) -100 to 850°C (-148 to 1562°F) |
| K Thermocouple | -200 to 1300°C (-328 to 2372°F) -200 to 500°C (-328 to 932°F) |
| L Thermocouple | -200 to 500°C (-328 to 932°F) |
| U Thermocouple | -200 to 800°C (-328 to 1472°F) |
SPECIFICATIONS
Inputs: Thermocouple or RTD, see chart
Display: Two 4-digit, 7-segment, LEDs
Resolution: 1 degree
PV: Red, 19 mm (0.75') H
SV: Green, 12.7 mm (0.5') H
Accuracy: ± 0.25% span, ± 1 least significant digit
Supply Voltage: 100 to 240 Vac, 50/60 Hz
Power Consumption: 5 VA max
Operating Temperature: 0 to 50°C (32 to 122°F)
Memory Backup: Nonvolatile memory
Control Output Ratings:
Relay: SPST, 5A @ Vac resistive
Voltage Pulse: 14V, 10 to -20% (max 40 mA)
Current: 4 to 20 mA
Communication: RS-485 MODBUSR communication protocol
Panel Cutout: ¼DIN, 92 mm square (3.622 square')
Dimensions: 96 x 96 x 15.8 mm bezel (3.78 x 3.78 x 0.625')
Panel Depth: 79.2 mm (3.125')
Weight: 425 g (15 oz)
Front Panel Rating: IP66
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Rated 4 out of
5
by
Project Engineer from
Decent little controller
These little controllers come with a good array of features for the price. However, the mounting clips they come with are cheap, easily broken, and very difficult to get replacements without ordering a whole new controller.
Date published: 2016-09-02
Rated 5 out of
5
by
CIL Inc from
Powerful controller
Very flexible programming. Easy to set up. Difficult to navigate.
Date published: 2024-02-12
Rated 5 out of
5
by
Trevor H from
Great Temp Controller
Controller was easy to install and program. It’s operation is simple and efficient. Very good quality build. I will use this brand for process controllers moving forward.
Date published: 2020-05-20
For the Current Output option, when the controller is tuned correctly, is the 4-20mA output altered to maintain the setpoint or is it just a constant pulse?
Thank you for your inquiry DJ92. A 4-20 mA output changes depending on how close or far away you are from the setpoint. Therefore, a 4-20 mA is not a constant pulse.
Date published: 2024-09-30
Is the relay electromechanical or solid state? Is the relay enclosed?
The CN733 has one Relay: SPST, 5A @ 250 Vac resistive. Thanks for connecting with Omega. Please contact our Tech Support with any further questions.
Date published: 2019-05-15
I can no longer enter auto tune. When I get to the AT selection, I can't select ON. Is there some way to restore auto tune functionality?
Hi Anonymous,
Please check that you are in PID mode and not in the Program mode for ramp soak.
Best regards
OMEGA
Date published: 2021-03-27