Welcome to our new website, found an issue or bug? Please report it here
CNI8DH33
1/8 DIN Dual Display Temperature, Process and Strain PID Controllers
Choose a Variant
Form factor
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$708.23 |
| 10-24 | C$672.82 |
| 25-49 | C$637.41 |
| 50-99 | C$602.00 |
| 100-499 | C$566.58 |
| 500+ | C$531.17 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| A/D Conversion | Dual Slope |
| Accuracy | ± 0.5 °C (± 0.9 °F) |
| Accuracy Note | ± 0.5°C temp; 0.03% rdg |
| Additional Features 1 | Dual Display Horizontal, Built-In Excitation, Front Removable |
| Approvals | UL, C-UL, CE per 2014/35/EU |
| CMRR | 120 dB |
| Control Characteristics | Action: Reverse (heat) or direct (cool) Modes: Time and amplitude proportional control; selectable manual or auto PID, proportional, proportional with integral, proportional with derivative and anti-reset Windup, and on/off Rate: 0 to 399.9 s Reset: 0 to 3999 s Cycle Time: 1 to 199 s; set to 0 for on/off Gain: 0.5 to 100% of span; setpoints 1 or 2 Damping: 0000 to 0008 Soak: 00.00 to 99.59 (HH:MM), or OFF Ramp to Setpoint: 00.00 to 99.59 (HH:MM), or OFF Auto Tune: Operator initiated from front pane |
| Control Output | SPDT Relay, Alarm |
| Current, Max | 0 to 20 mA (5 Ω load) |
| Cutout Dimensions | 45 x 92 mm |
| Decimal Selection | 0,001, 0,01, 0,1, None |
| Digital Filter | Programmable |
| Display Size | 46 mm (1.8 in) |
| Display Type | 4 Digit LED |
| Display Type Note | 4-digit 9-segment LED 10.2 mm (0.40"); i32, i16, i16D, i8DV 21 mm (0.83"); i8 10.2 mm (0.40") and 21 mm (0.83"); i8DH RED, GREEN, and AMBER programmable colors for process variable, setpoint and temperature units |
| Enclosure Ratings | NEMA Type 1 |
| Form factor | 1/8 DIN |
| Height | 48 mm |
| Impedance Input | 10 MΩ for 100 mV; 1 MΩ for 1V or 10 Vdc |
| Input Configuration | Single-ended |
| Input Type | Thermocouple, RTD, mA, Voltage |
| Input Voltage | 0 to 100 mV, 0 to 1 Vdc, 0 to 10 Vdc |
| Isolation | Power to Input/Output: 2300 Vac per 1 minute test For Low Voltage Power Option: 1500 Vac per 1 minute test Power to Relay/SSR Output: 2300 Vac per 1 minute test Relay/SSR to Relay/SSR Output: 2300 Vac per 1 minute test RS232/485 to Input/Output: 500 Vac per 1 minute test |
| Length | 127 mm |
| NMRR | 60 dB |
| Number of Inputs | 4 |
| Offset Adjustment | -1999 to 9999 |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | Relay/Relay;Relay: 250 Vac or 30 Vdc @ 3 A (resistive load); configurable for on/off, PID and ramp and soak Output 1: SPDT, can be configured as alarm 1 output Output 2: SPDT, can be configured as alarm 2 output Isolated Analog Voltage and Current Current: 10 V max @ 20 mA output Voltage: 20 mA max for 0 to 10 V output |
| Output Signal | Current, Voltage |
| Polarity | Unipolar |
| RTD Type | 100/500/1000Ω Pt sensor; 2-, 3- or 4-wire; α=0.00385 or 0.00392 |
| Resolution | 1°/0.1°; 10 µV process |
| Sampling Rate | 3 Hz (3 updates/second) |
| Set Point Adjustment | Menu Configurable |
| Span Adjustment | 0.001 to 9999 counts |
| Step Response | 0.7 sec for 99.9% |
| Supply Power Note | 90 to 240 Vac ± 10%, 50 to 400 Hz*, 110 to 300 Vdc, equivalent voltage Low Voltage Power Option: 24 Vac**, 12 to 36 Vdc for DPi/CNi/DPiS/CNiS; 20 to 36 Vdc for dual display, ethernet and isolated analog output from qualified safety approved source |
| Supply Power Type | AC |
| Supply Voltage | 90 to 240 Vac |
| Temperature Stability | RTD: 0.04°C/°C ;TC @ 25°C (77°F): 0.05°C/°C; Cold Junction Compensation; Process: 50 ppm/°C |
| Thermocouple Lead Resistance, Max | 100 Ω |
| Thermocouple Type | J, K, T, E, R, S, B, C, N, L (J DIN) |
| Weight | 295 g |
| Width | 96 mm |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews