1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
FSV13
316SS - 1/4" Compression, 0.055 Cv ECV
Choose a Variant
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Air Flow, Max | 21500 ml/min |
| Approvals | RoHS, CE |
| Approvals Note | EMC Directive 89/336/EEC EN55011:1991; Group 1, Class A EN50082-2:1995 |
| Cable Length | 8 in |
| Cv Factor | 0.055 gal/min |
| Differential Pressure, Max | 50 psi |
| Electrical Connection | 9 - Pin D Connector |
| Flow Rate Note | Based on 10 psig (690 mbar) differential pressure. |
| Height | 1 in |
| Input Control Signal | 0 to 5 Vdc, 4 to 20 mA |
| Leak Rate Under Vacuum | less than 10^⁻9 cc He/s |
| Length | 3 in |
| Material Construction Option | N/A |
| Materials, Wetted | 316 Stainless Steel, 416 Stainless Steel, FKM |
| Operating Pressure, Max | 500 psi |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Orifice Size | 0.055 in |
| Pressure Type | Differential |
| Process Connection Size | 1/4 in |
| Process Connection Type | Compression Fitting |
| Process Temperature, Max | 54 °C |
| Process Temperature, Min | -10 °C |
| Response Time | 500ms |
| Supply Power Note | 12 to 30 Vdc, 1 A @ 12 Vdc; 0.5 A @ 24 Vdc via 9-pin D connector or DC power jack |
| Supply Voltage | 12 to 30 Vdc |
| Surface Temperature, Max | 54 °C |
| Turndown Ratio | 100:1 |
| Valve Height | 3.45 in |
| Valve Length | 3.25 in |
| Valve Type | normally closed |
| Valve Width | 1 in |
| Water Flow, Max | 700 ml/min |
| Width | 3 in |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 1 out of
5
by
Anonymous from
Did not work with a water application.,
Device only controlled between 9.5 and 11.2 ma. otherwise it was either no flow, or sporadic flow outside of the range. Within the 9.5 to 11 ma there was no consistency. I was told by technical support that's normal. They would not take it back. My application was 175 to 300 psi H20 metering the flow between 40 and 110 ccm. I would not recommend this product.
Date published: 2021-08-09