Welcome to our new website, found an issue or bug? Please report it here
CL540ZA-series
14 Thermocouple Types and Millivolt Calibrator & Simulator
Models In Stock
- Source 14 Thermocouple Types
- Easy-to-Read Backlight Display
- Easily Change Thermocouple Types and Scale
- Calibrate Directly in Temperature (°C or °F)
CL540ZA-series
From
C$
1,876.25
Models In Stock
Product Overview
- Accuracy ± 0.015 %
- Accuracy Note ± (0.015% of reading + 0.006 mV)
- Additional Features 1 Source Only
- Battery Indication A low battery indication is displayed when the battery voltage drops below the operating level
- Battery life 50 hr
- Cold Junction Compensation ± 0.25°C
- Dimensions(Boot) 144 L x 78 W x 52 D mm
- Display Type LCD
- Display Type Note High contrast graphic liquid crystal display, LED backlighting for use in low lit areas
- Height 45 mm
- Length 126 mm
- Operating Temperature, Min -25 °C
- Over-Voltage Protection Over-voltage protection to 60 Vdc (rated for 30 seconds)
- Relative Humidity, Max 0.9
- Relative Humidity, Min 10%
- Relative Humidity Note 10% ≤ RH ≤ 90% 0 to 35°C (32 to 95ºF), non-condensing. 10% ≤ RH ≤ 70% 35 to 60°C (95 to 140ºF), non-condensing
- Supply Voltage 6 Vdc
- Thermocouple Type J, K, T, E, R, S, B, C, N, L, G, U, D
- Voltage Source Output Impedance: < 0.3 Ω Source Current: > 20 mA (drives 80 mV into 10 Ω) Noise: ≤ 4 microvolts p-p for frequencies of 10 Hz or below
- Weight 238 g
- Weight(Boot) 311.8 g
- Weight Note 238 g (8.4 oz) (including batteries)
- Weight Note(Boot) 311.8 g (11 oz) (including batteries)
- Width 69 mm
With the CL540ZA you can check and calibrate all your thermocouple instruments. Connect via a miniature thermocouple connector on the top end of the source. Use your own thermocouple wire connectors or order one of the cable accessories for easy operation out of the box. Easy to operate even in the dark areas of the plant with the backlit display. Stop carrying around a millivolt source and thermocouple tables. The CL540ZA works with the thermocouples you use including Types J, K, T, E, R, S, B, N, G, C, D, L (J-DIN), U (T-DIN) and P (Platinel II). Easily set any value quickly to within 0.1° with the adjustable digital potentiometer “DIAL” plus store any three temperatures for instant recall with the selector switch. You can also calibrate from -13.000 to +80.000 mV. Connect directly to the thermocouple inputs of smart transmitters, PLCs, controllers and multichannel recorders and verify their outputs or displays.
SPECIFICATIONS
Accuracy: ± (0.015% of Reading + 0.006 mV)
Cold Junction Compensation: ± 0.25°C (± 0.45°F)
Operating Temperature Range: -25 to 60°C (-10 to 140°F)
Millivolt Range: -13.000 to 80.000 mV
Relative Humidity Range: 10% ? RH ? 90% 0 to 35°C (32 to 95°F), non-condensing. 10% ? RH ? 70% 35 to 60°C (95 to 140°F), non-condensing
Dimensions: 126 L x 69 W x 45 mm D (4.96 x 2.73 x 1.79")
With Boot: 144 L x 78 W x 52 mm D (5.67 x 3.06 x 2.05")
Weight: 238 g (8.4 oz) (including batteries)
With Boot: 311.8 g (11 oz) (including batteries)
Batteries: Four "AA" Alkaline 1.5V (included)
Battery Life: 50 hours
Low Battery: Low battery indication with nominal 1 hour of operation left
Protection Against Misconnection: Over-voltage protection to 60 Vdc (rated for 30 seconds)
Display: High contrast graphic liquid crystal display. LED backlighting for use in low lit areas
Source
Output Impedance: < 0.3 ?
Source Current: > 20 mA (drives 80 mV into 10 ?)
Noise: ?4 microvolts p-p for frequencies of 10 Hz or below
SPECIFICATIONS
Accuracy: ± (0.015% of Reading + 0.006 mV)
Cold Junction Compensation: ± 0.25°C (± 0.45°F)
Operating Temperature Range: -25 to 60°C (-10 to 140°F)
Millivolt Range: -13.000 to 80.000 mV
Relative Humidity Range: 10% ? RH ? 90% 0 to 35°C (32 to 95°F), non-condensing. 10% ? RH ? 70% 35 to 60°C (95 to 140°F), non-condensing
Dimensions: 126 L x 69 W x 45 mm D (4.96 x 2.73 x 1.79")
With Boot: 144 L x 78 W x 52 mm D (5.67 x 3.06 x 2.05")
Weight: 238 g (8.4 oz) (including batteries)
With Boot: 311.8 g (11 oz) (including batteries)
Batteries: Four "AA" Alkaline 1.5V (included)
Battery Life: 50 hours
Low Battery: Low battery indication with nominal 1 hour of operation left
Protection Against Misconnection: Over-voltage protection to 60 Vdc (rated for 30 seconds)
Display: High contrast graphic liquid crystal display. LED backlighting for use in low lit areas
Source
Output Impedance: < 0.3 ?
Source Current: > 20 mA (drives 80 mV into 10 ?)
Noise: ?4 microvolts p-p for frequencies of 10 Hz or below
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Captain Ballard from
Thermocouple injector
Excellent product! Affordable price too. Best injector I have ever used.
Date published: 2017-11-15
Rated 4 out of
5
by
Production Manager from
Works well but lacks the speed adjust
Purchased this to replace an older model. We liked several of the upgrades but miss the ability to quick adjust the temperature (mV) output.
Date published: 2016-02-12
Rated 5 out of
5
by
Mr Jeff T from
Awesome tool!
Excellent tool for troubleshooting/testing controls
Date published: 2024-05-24
Rated 4 out of
5
by
jaslav from
Very handy and effective
Great working product, nice an handy when trouble shooting or needing to verify temps.
Date published: 2018-10-17
Can we use this CL540ZA Model for Thermocouples type P Thanks AM
Hi Andmir,
Thank you for the inquiry. This calibrator does not have a range for type P.
Best regards
OMEGA
Date published: 2023-10-07
CL540Z calibrator use : for different different types of thermocouple types we need to use different different types of thermocouple wires for calibration or who we need to verify all the thermocouple modules?
Thank you for your inquiry Swapna. That is correct to use different thermocouple types you need to use the corresponding thermocouple wire to make sure you are using the correct metals with the specific thermocouple type. If this is not follow then you will not be using this unit correctly.
Date published: 2022-12-16
Does this simulator come with an NIST calibration cert?
Hi Chris,
Thank you for the inquiry. Yes, this product includes NIST certificate.
Best regards
OMEGA
Date published: 2024-01-16
We use "two point" thermocouples to measure surface temperature of aluminum. Could this simulator be used to check the two point devices periodically?
The CL540Z will only simulate a thermocouple. This device is used to check instrument display for correct response. The devices to check the probes are as follows; CL514-PLUS or the low cost CL3512A
If you have a stable surface temperature that can be verified with reference probe then you can use the above meters to verify the probe readings by comparison check. Please contact us anytime with any further questions.
Date published: 2019-06-13