Welcome to our new website, found an issue or bug? Please report it here
SV6100-Series
2-Way, NC, Pilot Operated, Brass Solenoid Valves
- Normally Closed
- Ideal for Compressed Air, Inert Gas, Synthetic Oils and Water
- 120 Vac Standard (220 Vac and DC Coils are Optional)
- 8 W, AC Coils Standard
SV6100-Series
From
C$
894.21
Product Overview
- Close Response Time 100 to 4000 ms
- Coil Molding Material Black Polyester (Class F): SV8COIL-115AC, SV8COIL-24DC/60HZ, SV8COIL-220AC Black Polyamide (Class F): SV8COIL-12DC, SV8COIL-24DC, All 12 Watt coils Black Polyphenylensulphide (Class H): SV8COIL-115/60HZ Black Epoxy Resin (Class H):All 14 watt coils
- Coil Power 8 W
- Cycling Rate 10 to 50 cpm
- Duty Cycle 100%
- Materials Brass, FKM, Stainless Steel 300, Stainless Steel 400, Copper
- Materials, Wetted Brass, Copper, FKM, Stainless Steel
- Media Compatibility Alcohols, Argon, Compatible Gases, Compatible Liquids, Nitrogen, Oils, Water
- Media Type N/A
- Mounting Any (preferably with solenoid system upright)
- Open Response Time 200 to 500 ms
- Operating Pressure, Max 150 psi
- Operating Pressure, Min 2 psi
- Operating Pressure Note AC 150 psi, DC 150 psi
- Process Connection Type NPT Male
- Process Temperature, Max 137 °C
- Process Temperature, Min -10 °C
- Supply Voltage 120 Vac
- Valve Position Normally Closed
- Valve Type Direct Lift
- Voltage Tolerance ±10%
SV6100 Series 2-way solenoid valves are internally piloted with assisted lift valves featuring Brass, stainless steel construction and FKM seal material. The temperature range from -10 to 137°C (14 to 280°F) and FKM O-ring material is ideal for neutral media such as compressed air, inert gases, synthetic oils and water. A strain-relief connector is supplied with each unit. A ½" conduit plug is also available.
SPECIFICATIONS
Mounting Position: Any (preferably with solenoid system upright)
Operating Ambient:
FKM O-Ring: -10 to 137°C (14 to 280°F)
Maximum Process Temperature: Coil dependent (see ratings on coils)
Voltage Tolerance: ± 10%
Opening Time (msec): 200 to 500 approximately
Closing Time (msec): 100 to 4000 approximately
Cycling Rate: approximately 10 to 50 cpm
Duty Cycle: Continuous (100%)
Coil Molding Material:
Black Polyester (Class F): SV8COIL-115AC, SV8COIL-24DC/60HZ, SV8COIL-220AC
Black Polyamide (Class F): SV8COIL-12DC, SV8COIL-24DC, All 12 Watt coils
Black Polyphenylensulphide (Class H): SV8COIL-115/60HZ
Black Epoxy Resin (Class H): All 14 watt coils
SPECIFICATIONS
Mounting Position: Any (preferably with solenoid system upright)
Operating Ambient:
FKM O-Ring: -10 to 137°C (14 to 280°F)
Maximum Process Temperature: Coil dependent (see ratings on coils)
Voltage Tolerance: ± 10%
Opening Time (msec): 200 to 500 approximately
Closing Time (msec): 100 to 4000 approximately
Cycling Rate: approximately 10 to 50 cpm
Duty Cycle: Continuous (100%)
Coil Molding Material:
Black Polyester (Class F): SV8COIL-115AC, SV8COIL-24DC/60HZ, SV8COIL-220AC
Black Polyamide (Class F): SV8COIL-12DC, SV8COIL-24DC, All 12 Watt coils
Black Polyphenylensulphide (Class H): SV8COIL-115/60HZ
Black Epoxy Resin (Class H): All 14 watt coils
PDFs & Manuals
