DP3001

4-1/2 Digit DC Voltmeter, 1/8 DIN

5.0

(1)

±19,999 Count Display Span
±2 V to ±200 Vdc Ranges
True-Differential Input
120 dB CMR, 56 dB NMR

See Product Overview

DP3001

From ^C$ 464.73

Shop Models

5 Variations available

See all series options below

Data Sheet

Product Overview

A/D Conversion Dual-slope, average value
Accuracy ± 0.01 % of reading ± 2 counts
Cutout Dimensions 45 x 92 mm
Depth Behind Panel 104 mm
Digital I/O Note HOLD and TEST Inputs: TTL or 5 V CMOS compatible Blanking Input: Open-collector compatible
Display Size 14 mm (.56 in)
Display Type 4.5 Digit LED
Display Type Note Symbols: -1.8.8.8.8 Decimal Points: Four positions selectable by jumpers from front panel or at connector, 10 mA sink Overrange Indication: Four least-significant digits flash
Enclosure Material Polycarbonate
Enclosure Ratings IP65, NEMA Type 4
Form factor 1/8 DIN
Front Bezel 96 W x 48 H x 5.1 D mm
Impedance Input 1 GΩ
Input Configuration Bipolar, Differential
Input Range Note Analog Input Range: ±2, ±20, ±200 V External Reference Input: +0.5 to +2.0 V Load on Reference, Std: 6 kΩ Load on Reference, Opt: 100 MΩ
Noise Rejection NMR, SIG HI to SIG LO: 56 dB, 50/60 Hz ;CMR, SIG LO to ANA GND: 86 dB, DC to 60 Hz ;CMR, AC GND to ANA GND: 120 dB, DC to 60 Hz ;CMV, SIG LO to ANA GND: ±1 Vp ;CMV, AC GND to ANA GND: 1500 Vp per HV test, 354 Vp per IEC spacing
Operating Temperature, Max 60 °C
Operating Temperature, Min 0 °C
Polarity Automatic
Power Consumption 2.5 W
Reading Rate 2.5 samples/sec
Relative Humidity 95% at 40°C (non-condensing)
Resolution 100 µV
Sensor/Transmitter Power 4.7 Vdc and -4.6 Vdc ±5%,10 mA max
Signal Integration Period 100 ms
Span Adjustment ± 5 %
Step Response 1 sec
Storage Temperature, Max 85 °C
Storage Temperature, Min -40 °C
Supply Power Note AC Voltages: 115 or 230 Vac ±15% AC Frequency: 49 to 440 Hz DC Voltages: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp Power Consumption: 2.5 W
Thermal Span Effect ±0.01% of reading/°C
Voltage Measurement Range ±1.9999 Vdc
Warm-Up to Rated Accuracy 10 min
Weight 400 g

This product is no longer available. Please see DPPT-Series as a possible alternative or contact our Engineering department for a viable replacement.

The DP3001 is a low-cost, true-differential 4-1/2 digit panel meter for applications that require high resolution and high accuracy DC measurement. It fits a standard 1/8 DIN panel cutout and requires a depth of less than 104 mm (4.1") behind the panel. Display span is ±19,999 counts. Accuracy is 99.98%.

INPUT RANGES
The DP3001 offers DC voltage ranges of ±1.9999, ±19.999 and ±199.99 Vdc. By using an external DC voltage reference, any of these ranges can be configured for 3-wire ratio measurement.

OPTIONS
The meter can be electrically configured for three input voltage ranges, four decimal-point positions, high-impedance 3-wire ratio input. Mechanical options include a screw-terminal barrier strip for signal and power and a splash-proof lens cover which meets NEMA 4 (IP65) requirements.

PDFs & Manuals

DP3001_spec DP3001 View More

View Less

Compliance