Welcome to our new website, found an issue or bug? Please report it here
DP3002-JKT
4-1/2 Digit Thermocouple Meters, 1/8 DIN
- J, K or T Thermocouple Input
- 0.05 deg/deg Cold-Junction Error
- -138 to 1248°C Range
- Five-Segment Linearization
DP3002-JKT
From
C$
470.00
Product Overview
- A/D Conversion Dual-slope technique
- Accuracy ± 1.5 °C (± 2.7 °F) + 1 count
- Calibration IEC 584-1 (IPTS-68)
- Cutout Dimensions 45 x 92 mm
- Depth Behind Panel 104 mm
- Digital I/O Note Level: TTL or 5V CMOS compatible
- Display Size 14.2 mm (0.56 in)
- Display Type 4.5 Digit LED
- Display Type Note Symbols: -1.8.8.8.8 Decimal Points: Four positions programmable by jumpers behind the lens or at connector Overrange Indication: Four least-significant digits flash
- Enclosure Material Polycarbonate
- Enclosure Ratings IP65, NEMA Type 4
- Form factor 1/8 DIN
- Front Bezel 96 W x 48 H x 5.1 D mm
- Input Configuration Single-ended
- Lead Resistance, Max Type K: 50 µdeg/deg/Ω, up to 2000 Ω, Current Break: 300 nA
- Noise Rejection NMR, SIG HI to SIG LO: 70 dB, 50/60 Hz ;CMR, ANA GND to PWR GND: 120 dB, DC to 60 Hz ;CMV, ANA GND to PWR GND: 1500 Vp per HV test, 354 Vp per IEC spacing
- Operating Temperature, Max 60 °C
- Operating Temperature, Min 0 °C
- Output Configurations Analog Current/Voltage
- Output Configurations Note Voltage: 1 mV/deg Calibration Error: ±1.5 mV on °C, ±2.7 mV on °F Current: 1 mA max Source Resistance: 68 Ω
- Polarity Bipolar
- Power Consumption 3.7 W
- Reading Rate 2.5 samples/sec
- Relative Humidity 95% at 40°C (non-condensing)
- Sensor Break Detection Positive overrange (upscale)
- Sensor/Transmitter Power 4.7 Vdc and -4.7 Vdc ±5%, 10 mA max
- Step Response 1 sec
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Supply Power Note AC Voltages: 115 or 230 Vac ±15% AC Frequency: 49 to 440 Hz DC Voltages: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp Power Consumption: 2.5 W
- Supply Voltage 9 to 56 Vdc, 115 to 230 Vac
- Temperature Coefficient ±0.05 deg/deg
- Temperature Measurement Range -105 to 1248°C
- Thermal Span Effect ±0.01% of reading/°C
- Warm-Up to Rated Accuracy 20 min
- Weight 425 g
This product is no longer available. Please see DPPT-Series as a possible alternative or contact our Engineering department for a viable replacement.
The DP3002-J, -K and -T are low-cost 4-1/2 digit (±19,999 count) thermocouple meters with 0.1°C or 0.1°F resolution for indication-only applications. High accuracy is provided by five-segment linearization and matched, graded components for each T/C type.
STANDARD FEATURES
Mechanical features include a bright 14 mm (0.56") display, a screw-terminal barrier strip for signal and power, and a compact 1/8 DIN case that requires less than 104 mm (4.1") behind the panel. Electrical features include cold-junction compensation, jumper selection of °C or °F, and a linearized recorder output of 1 mV per degree.
OPTIONS
Power options include isolated 9 to 32 Vdc and 26 to 56 Vdc. A splash-proof lens cover which meets NEMA 4 (IP65) requirements allows the DP3002 to be used in harsh industrial environments.
STANDARD FEATURES
Mechanical features include a bright 14 mm (0.56") display, a screw-terminal barrier strip for signal and power, and a compact 1/8 DIN case that requires less than 104 mm (4.1") behind the panel. Electrical features include cold-junction compensation, jumper selection of °C or °F, and a linearized recorder output of 1 mV per degree.
OPTIONS
Power options include isolated 9 to 32 Vdc and 26 to 56 Vdc. A splash-proof lens cover which meets NEMA 4 (IP65) requirements allows the DP3002 to be used in harsh industrial environments.
PDFs & Manuals
Show Ratings & Reviews