Welcome to our new website, found an issue or bug? Please report it here
MDSi8-MDSSi8
Benchtop Digital iSeries Thermometers Ten-Channel Models
Models In Stock
- Portable, Rugged Metal Benchtop Enclosure with Tilt Handle
- 10-Channel Models
- Built Around OMEGA’s Award Winning iSeries Meters
- 5-Year Warranty
MDSi8-MDSSi8
From
C$
1,013.21
Models In Stock
Product Overview
- A/D Conversion Dual slope
- Accuracy ± 0.4 °C
- Accuracy Note RTD (Pt, 0.00385, 100, 500, 1000 Ω) : 0.4°C, RTD (Pt, 0.00392, 100, 500, 1000 Ω) : 0.4°C
- Additional Features 1 Benchtop Enclosure
- Common Mode Rejection 120 dB
- Control Output 2 SPDT Relay
- Current Measurement Range 0 to 20 mA
- Data Interface RS232, RS422, RS485
- Data Interface Note RS232/RS422/RS485: Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 Kb; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 Kb; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status RS485: Addressable from 0 to 199
- Decimal Selection 0, 0,001, 0,01, 0,1
- Digital Filter Programmable
- Display Color Red, Green, Amber
- Display Size 10.2 mm (0.40 in)
- Display Type 4 Digit, 9 Segment LED
- Display Type Note 4-digit, 9-segment LED, 10.2 mm (0.40") i32, i16, i16D, i8DV: 21 mm (0.83") i8: 10.2 mm (0.40") and 21 mm (0.83"), i8DH—GREEN, AMBER, and RED programmable colors for process variable, setpoint and temperatureunits
- Electrical Connection Sub-D Female Miniature Connector
- Electrical Connection Note DB-9 connector on rear panel; optional alarm 1 and 2 (programmable)
- Form factor 1/8 DIN
- Frequency 50 to 60 Hz
- Impedance Input 10 MΩ for 100 mV, 1 MΩ for 1 or 10 Vdc
- Input Configuration Single-ended
- Normal Mode Rejection 60 dB
- Number of Inputs 1
- Offset Adjustment -1999 to +9999
- Output Detail Optional Alarm 1 and 2 (Programmable) Type: Form “C” SPDT relays Operation: High/low, above/below, (limited output to 30 Vrms only) band, latch/unlatch, normally open/normally closed and process/deviation; front panel configurations Optional Analog Output (Programmable): Non-isolated, retransmission 0 to 10 Vdc or 0 to 20 mA, 500 Ω max (output 1 only). Accuracy is ± 1% of FS when following conditions are satisfied. 1) Input is not scaled below 1% of input FS 2) Analog output is not scaled below 3% of output FS ;
- Polarity Unipolar
- Reading Rate 3 samples/sec
- Resolution 1°/0.1°; 10 µV process
- Set Point Adjustment -1999 to 9999 counts
- Span Adjustment 0.001 to 9999 counts, programmable
- Step Response 0.7 sec for 99.9%
- Supply Voltage 90 to 240 Vac
- Temperature Measurement Range RTD (Pt, 0.00385, 100, 500, 1000 Ω) : -200 to 900°C, RTD (Pt, 0.00392, 100, 500, 1000 Ω) : -200 to 850°C
- Temperature Stability 0.04°C/°C
The MDSi8 single channel models have been discontinued. As a possible substitute, please check out the MDS8PT MDS8PT for details. At the same time, we will keep the 10 channel models MDSSi8 till the end of 2018.
The OMEGAâ„¢ MDSSi8 is a 1/8 DIN size (96 x 48 mm) Digital Panel Meter in a rugged benchtop metal enclosure featuring the big iSeries color-changing display. The digits are twice the size of typical 1/8 DIN panel meters. The iSeries meters feature the only LED displays that can be programmed to change color between GREEN, AMBER, and RED at any set point or alarm point. Other options include isolated programmable analog output, serial communications, Modbus and Ethernet.
The UNIVERSAL TEMPERATURE & PROCESS instrument model "i" handles ten common types of thermocouples, multiple RTD’s, and several Process (DC) Voltage and Current ranges.
Ready to Order? Popular models and options shown below. Please Review the Spec Sheet for product details and other models available that will meet your requirements, then order below Using the "Part Number" Ordering Box!
The OMEGAâ„¢ MDSSi8 is a 1/8 DIN size (96 x 48 mm) Digital Panel Meter in a rugged benchtop metal enclosure featuring the big iSeries color-changing display. The digits are twice the size of typical 1/8 DIN panel meters. The iSeries meters feature the only LED displays that can be programmed to change color between GREEN, AMBER, and RED at any set point or alarm point. Other options include isolated programmable analog output, serial communications, Modbus and Ethernet.
The UNIVERSAL TEMPERATURE & PROCESS instrument model "i" handles ten common types of thermocouples, multiple RTD’s, and several Process (DC) Voltage and Current ranges.
Ready to Order? Popular models and options shown below. Please Review the Spec Sheet for product details and other models available that will meet your requirements, then order below Using the "Part Number" Ordering Box!
PDFs & Manuals
