Welcome to our new website, found an issue or bug? Please report it here
CDE-440-01
Choose a Variant
Conductivity Measurement
Construction Type
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Additional Features 1 | Anti-Corrosion Treatment: Finished with electrostatic epoxy paint |
| Cell Constant | 0.1 |
| Conductivity | 1 μS/cm to 2 S/cm |
| Conductivity Measurement | 0.1 to 20000 μS |
| Conductivity Measurement Note | 0.1 µS to 20 mS, K = 0.1, 0 to 130°C (32 to 266°F), 10 kg/cm^2 |
| Construction Type | Standard |
| Data Interface | RS485 Modbus |
| Display Mode | Continuous, average or hold |
| Display Type | 2 lines with 16 characters LCD |
| Electrical Output | 4 Outputs (4-20 mA, 2 Normaly open Relay) |
| Enclosure Ratings | IP68, NEMA Type 4 |
| Frequency | 50/60Hz |
| Galvanic Isolation | 2000 Vac |
| Housing Material | Aluminum, ABS |
| Impedance | 600 Ω |
| Insertion Length | 42 mm |
| Measurement Type | Conductivity |
| Operating Temperature, Max | 40 °C |
| Operating Temperature, Min | 5 °C |
| Output Detail | 2 N.O. (1A/240 Vac) on/off alarm or PWM; 4 to 20 mA for PID control or retransmission |
| Power Consumption | 3.5 VA |
| Process Connection Material | 316 Stainless Steel |
| Process Connection Size | 3/4 in |
| Process Connection Type | NPT Male |
| Process Temperature Note | Automatic or Manual Temperature Compensation: 0 to 100°C (32 to 212°F) Temperature Compensation: NTC-R typical 5 Ω at 25°C (77°F |
| Process Temperature, Max | 130 °C |
| Process Temperature, Min | 0 °C |
| Resistance | 10 MΩ |
| Resolution | 0.1 or 0.01 |
| Supply Voltage | 90 to 240 Vac |
| Weight | 1.3 kg |
| See All Specs | |
Show Ratings & Reviews