Welcome to our new website, found an issue or bug? Please report it here
PSW2100
Electronic Pressure Switch with OLED Display and Alarm Outputs
Models In Stock
- 5-digit OLED display
- 2 alarm outputs
- 350° rotating display
- Durable housing rated IP67
PSW2100
From
C$
741.74
Models In Stock
Product Overview
- Accuracy ± 0.2 %
- Deadband Type Adjustable
- Display OLED Display
- Electrical Connection M12 4 pin Male
- Enclosure Ratings IP67, NEMA Type 6
- Materials 316L Stainless Steel, Stainless Steel
- Output Value 4 to 20 mA
- Pressure Type Gauge
- Process Connection Type NPT Male
- Process Temperature, Max 120 °C
- Process Temperature, Min -40 °C
- Stability ± 0.2% URL / 5 years
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Supply Power Note ≤1.44W(4-20mA+ transistor + OLED display @24Vdc)
- Supply Voltage 12 to 30 Vdc
- Transmission Distance up to 1000 meters
- Vibration GB/T 1827.3/IEC61298-3 tests, <0.1% URL
- Weight 0.4 kg
Omega’s PSW2100 electronic pressure switches feature a fully programmable digital interface with monosilicon sensor technology. Setup and programming is painless with the use of three keys and a premium, easy-to-read 1” wide 5-digit OLED display. Visibility is maximized with a display capable of rotating 350° and also with two LEDs providing visual alarms. With the rotation capabilties and a rugged, well-protected IP67 housing rating, this pressure switch is capable of high performance in a wide variety of environments and installation positions. These features coupled with high accuracy make this switch a premium, user-friendly option for pressure measurement and monitoring.
PSW2100 - Alternative Views
Show Ratings & Reviews
Do these switches have CRN's?
Thank you for your inquiry, the PSW2100-005C doesn’t have CRN’S .
Date published: 2022-09-19
can it used on a helium supply system.
The wetted parts of this pressure transducer are all 316 Stainless Steel. It would be ok to use with Helium
Date published: 2021-11-10
What is the Emission and immunity to interference standard that applies to PSW2100 switch? For example, EN 61326 or NAMUR NE 21
Thank you for your inquiry. Contacting manufacturing for information on which standard it conforms to. Will forward the information via email to you directly via email
Date published: 2025-01-06
Will this switch work with a 4 pin M-12 connector?
This pressure switch requires a 5-pin M12 female connector. It will not interface with a 4-pin M12.
Date published: 2024-03-22
Just purchased a PSW2100-150C, I'm not getting a 4-20mA output, reads 21.1V open circuit and plugged into an measurement unit. Do I need to enable the output? Signal connection diagram is incorrect, Pin 3 RET pin 5 SIG 2 SW2 4 SW1
You should not have to enable the 4 to 20mA output. A wiring issue may be causing the problem. Reviewing the manual and will make corrections. Advise you contact us at pressure@omega.com with your contact information so we can respond directly with the resolution of this issue
Date published: 2022-11-30
Is this suitable for liquid measurement? The water we are measuring is contaminated with mercury.
The Process Connection Material for the PSW2100-400C is 316L SS, this material is suitable for liquids
Date published: 2021-05-19
Is this product capable of external visual warning/monitoring? As in output wired to 2-3 LEDs a couple feet away that read under pressure, good pressure, and/or overpressure? If not, could you point me in the direction of a product that does. Thank you.
The two on board transistor output can be wired to switch the power being used to drive the unit to also drive external alarm devices.
Date published: 2022-11-21