Series-DM

Differential Pressure Transmitter for Air/Gases, 4-20 mA Output

(0)

Models In Stock

Reduced installation time through zero and span controls that provides quick and easy calibration
Fast and easy setup and calibration with push-button zero and span controls
Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® gage, as both use the same diameter cutout

See Product Overview

Series-DM

From ^C$ 226.31

Models In Stock

Shop Models

9 Variations available

See all series options below

Data Sheet

Can't find the right model?

Use our custom configurator to fine tune your product

Product Overview

Accuracy Detail ± 1% FSO for all ranges except 0.25 in w.c. @ ± 2% FSO, and ranges at or below ± 0.1 in w.c. @ ± 4% FSO
Applications Filter Monitoring, HVAC
Burst Pressure 6 psi Maximum
Compliance CE
Dial Depth 48 mm
Dial Outer Diameter 127 mm
Display Type N/A
Electrical Connection Screw Terminal
Enclosure Ratings IP66, NEMA Type 4X
Long Term Stability < ± 1%FSO/year
Materials Polycarbonate
Media Compatibility Air, Argon, Carbon dioxide, Helium, Nitrogen, Non-Conductive Gases, Non-Corrosive Dry Gases
Mounting Note Not Position Sensitive
Number of Wires 2
Operating Temperature, Max 70 °C
Operating Temperature, Min -20 °C
Pressure Type Differential
Process Connection Size 1/8 in, 3/16 in, 1/4 in
Process Connection Type Stepped Barb Fitting
Span Adjustment Push Button
Thermal Effects 0.036% FS/°C
Weight 200 g
Zero Setting Adjustable Range Push button

The Series DM DigiMag® Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges. The polycarbonate molded housing features integral pressure connections, which reduces installation time. Digital push-button zero and span simplify calibration over typical turn-potentiometers. A single push-button allows field selection of 4 to 6 engineering units, depending on the range.

⚠WARNING: This product can expose you to Styrene a chemical known to the State of California to cause Cancer and Bisphenol A (BPA) a chemical known to the State of California to cause reproductive toxicity. Click Here.