Welcome to our new website, found an issue or bug? Please report it here
FL9000-Series
Easy-view Flow Meters For Water and Oil
Models In Stock
- ± 5% Full Scale Accuracy
- Direct Reading for Oil and Water
- NPT or Solder Fittings
- Polysulfone Construction
FL9000-Series
From
C$
135.44
Models In Stock
Product Overview
- Accuracy ± 5 %
- Design Type Piston
- Dim Across Flats 1 1/2 in
- Length 5.25 in
- Materials, Wetted Brass, Buna-N (NBR), Polysulfone, Stainless Steel
- Operating Pressure, Max 325 psi
- Process Temperature, Max 121 °C
- Repeatability ± 1%
- Scale Direct Read
- Valve Included false
The OMEGA™ FL-9000 EZ-View flowmeters provide accurate, in-line indication of oil or water flow rates at an economical cost. These meters utilize a spring and piston mechanism within a polysulfone metering tube. The EZ-View meters are designed to mount in any position with no straight pipe runs required.
SPECIFICATIONS
Accuracy: ± 5% FS
Repeatability: ± 1% full scale
Material: Polysulfone, T300 series stainless steel spring, Buna flow indicator ring, Buna O-rings (on units with brass end fittings)
Dimensions: 38.1 mm (1½") across flats
FL-9200: 196.8 mm (7¾") L
FL-9000 and 9100: 133 mm (5¼") L
Connection:
FL-9200: Fits ¾" nominal (7/8" OD) or 1" nominal (1-1/8" OD) Type M Copper Tubing;
FL-9000- and FL-9100: 1 NPT, Male
Max. Temperature: 121°C (250°F)
Max. Pressure: 22.4 bar (325 psig)
* Specific Gravity = 0.876
SPECIFICATIONS
Accuracy: ± 5% FS
Repeatability: ± 1% full scale
Material: Polysulfone, T300 series stainless steel spring, Buna flow indicator ring, Buna O-rings (on units with brass end fittings)
Dimensions: 38.1 mm (1½") across flats
FL-9200: 196.8 mm (7¾") L
FL-9000 and 9100: 133 mm (5¼") L
Connection:
FL-9200: Fits ¾" nominal (7/8" OD) or 1" nominal (1-1/8" OD) Type M Copper Tubing;
FL-9000- and FL-9100: 1 NPT, Male
Max. Temperature: 121°C (250°F)
Max. Pressure: 22.4 bar (325 psig)
| Model No.–NPT Fitting | Ranges (GPM) | Model No.– Solder Fitting | Ranges-Water (GPM) | |
| Water | Oil* | |||
| FL-9004 | FL-9104 | 0.5-4 | FL-9204 | 0.5-4 |
| FL-9007 | FL-9107 | 1.0-7 | FL-9207 | 1.0-7 |
| FL-9010 | FL-9110 | 1.0-10 | FL-9210 | 1.0-10 |
| FL-9016 | FL-9116 | 1.0-16 | FL-9216 | 1.0-16 |
| FL-9018 | FL-9118 | 3.0-18 | FL-9218 | 3.0-18 |
| FL-9028 | FL-9128 | 4.0-28 | FL-9228 | 4.0-28 |
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Maria60 from
Great equipment and great price
I do not work directly with this material but the Maintenance Team was happy with this.
Date published: 2016-03-30
Rated 5 out of
5
by
Dave R from
Excellent company to work with
The product works great. I must say the customer service I encountered was second to none. I would not hesitate to purchase from Omega Eng.
Date published: 2021-06-17
Rated 5 out of
5
by
kroj from
Very good product
I purchased this product primarily because of the temperature rating and the cost. Most of the flow meters I looked at in this price category did not meet the required temp or pressure rating. This one did.
Date published: 2016-08-15
Hello, The flow in my system is between 0 and 25 gpm. If I put on model FL-9028 (4 to 28 gpm) and the flow is lower than 4 gpm is the flowmeter completly close and no water is running or water is still flowing? Thank!
Thank you for your inquiry. The minimum flow rate is 4 GPM and the plunger will allow water to pass thru if under that flow rate.
Date published: 2020-12-09