Welcome to our new website, found an issue or bug? Please report it here
F3105-3100-W2100-2200
Individually Available Thin Film Platinum RTD Elements
Models In Stock
- Overall Temperature Range -70 to 600°C
- F3100 Series Flat Class A
- W2100 Series Cylindrical
- This Family of Elements Consists of Platinum 100, 200, 400, 500, 1000 and 2000 Ohm RTD's
F3105-3100-W2100-2200
From
C$
29.00
Models In Stock
Product Overview
- Temperature Coefficient 0.00385Ω/Ω/°C
- Temperature Sensor Type RTD
OMEGA introduces the OMEGAFILM™ platinum RTD element—an element achieved by employing construction techniques similar to those used to manufacture miniature electronic integrated circuits. The result: a precision element available in sizes considerably smaller than the head of a match. All this in a rugged, accurate, ceramic encased package! Best of all, OMEGAFILM™ elements are calibrated to the worldwide accepted DIN 43760 curve (alpha=0.00385), allowing use with standard off-the-shelf instrumentation available from OMEGA and others, both in the United States and abroad.
Accuracy and Specifications:
OMEGAFILM™ platinum RTD’s are calibrated to the internationally accepted DIN 43760 curve (alpha=0.00385) and meet 0.1% DIN standard tolerance. When you use these tables, please note that the specific operating ranges for elements vary and are listed on their specifications pages.
Applications: Because of their small size and thin, flat packaging, OMEGAFILM™ sensors greatly extend the field of RTD applications. Series W RTD elements are thin film encased in a cylindrical ceramic package. Series W single cylindrical RTD elements (such as the W2103) lend themselves to encapsulation in short …›' O.D. protection tubes or shallow holes bored in a metal casing . Series W dual RTD elements ( such as the W2202) consist of 2 separate 2 wire thin film RTD elements in a cylindrical ceramic 4 wire package. Series F (such as F3101) are thin film 2 wire RTD elements on a flat ceramic base. These may be taped, cemented or embedded. To obtain accurate representative measurements, good thermal contact between the surface and the element is important. For temporary installations, a compatible temperature-rated heat- conductive compound, such as a heat sink grease can be used.
Note on Assembling Omega 'F' Series RTD Elements to Extension Wires: These RTD elements are made with platinum coated nickel lead wires. Since platinum does not easily wet with most soft solders, we advise that they be spot welded or silver soldered to extension wires when required.
Accuracy and Specifications:
OMEGAFILM™ platinum RTD’s are calibrated to the internationally accepted DIN 43760 curve (alpha=0.00385) and meet 0.1% DIN standard tolerance. When you use these tables, please note that the specific operating ranges for elements vary and are listed on their specifications pages.
Applications: Because of their small size and thin, flat packaging, OMEGAFILM™ sensors greatly extend the field of RTD applications. Series W RTD elements are thin film encased in a cylindrical ceramic package. Series W single cylindrical RTD elements (such as the W2103) lend themselves to encapsulation in short …›' O.D. protection tubes or shallow holes bored in a metal casing . Series W dual RTD elements ( such as the W2202) consist of 2 separate 2 wire thin film RTD elements in a cylindrical ceramic 4 wire package. Series F (such as F3101) are thin film 2 wire RTD elements on a flat ceramic base. These may be taped, cemented or embedded. To obtain accurate representative measurements, good thermal contact between the surface and the element is important. For temporary installations, a compatible temperature-rated heat- conductive compound, such as a heat sink grease can be used.
| Series | 15 mm Lead Length Dimensions in Millimeters (1 mm = 0.03937') | Model No. | Nominal Single or Resistance Dual (ohms) | Temperature Range |
| W | W2102 W2112 W2122 W2132 W2142 W2152 | 1 x 100 1 x 200 1 x 400 1 x 500 1 x 1000 1 x 2000 | -50 to 600°C (-58 to 1112°F) | |
| W | W2202 W2212 W2222 W2232 W2242 | 2 x 100 2 x 200 2 x 400 2 x 500 2 x 1000 | ||
| W | W2103 | 1 x 100 | ||
| W2204 | 2 x 100 | |||
| WS | WS81 | 1 x 100 | -50 to 600°C (58 to 1112°F) |
| Series | 10 mm Lead Length Dimensions in Millimeters (1 mm = 0.03937') | Model No. | Nominal Single or Resistance Dual (ohms) | Temperature Range |
| F | F3101 F3131 F3141 | 1 x 100 1 x 500 1 x 1000 | Max range: -50 to 500°C (-58 to 932°F) however, Class A tolerance applies to -30 to 300°C (-22 to 572°F) | |
| F | F3102 F3132 | 1 x 100 1 x 500 | ||
| F | F3142 (Class B only) | 1 x 1000 | ||
| F | F3105-A F3145 | 1 x 100 1 x 1000 | ||
| F | F3107 | 1 x 100 |
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Ronald from
F3105 RTD
I needed an accurate temperature reading of a small area. The F3105 has a flat 2mmx2.5mm surface (other side is curved) which is perfect for me.
Using 3 conductor shielded cable, soldered 2 leads to one terminal making this a 3-wire RTD. Worked perfectly!
Date published: 2018-11-01
Rated 5 out of
5
by
Jaeger from
Consistent quality
Consistent quality RTDs always in spec. Omega RTDs have never given me issues and are surprisingly durable.
Date published: 2016-02-26
Rated 1 out of
5
by
ledmasters from
W2152 RTD has poor quality leads
We have used this RTD in our tools and have found the leads disintegrate when soldering with SN96 solder. Very poor quality leads!
Date published: 2017-01-31
Rated 3 out of
5
by
Anonymous from
Q/C before Parts Ship
every shipment as of yet, has had one or two parts that are damaged.
Date published: 2021-04-12
is this water proof, what i am looking for is to be able to lay on refrigerated cement floor and spray water on it to see the slab temp as the water freezes AKA. Ice Hockey floor.
The F3101 is not a waterproof RTD. The HSRTD series would be an example of an RTD assembly that would be waterproof.
Date published: 2020-01-08
What is the response time?
Thank you for your inquiry. Here is the response time data for all the F series thin film RTD elements: Response Time Water Current (v=0.4 m/s) t0.5 = 0.2 s; t0.9 = 0.4 s Air Stream (v = 1 m/s) t0.5 = 4.0 s; t0.9 = 12.0 s.
Date published: 2023-05-18
What is the best material to use to insulate the wires from each other when placing in a heat shrink? I am using at extreme's -65 to 280c
Thank you for your inquiry. Unfortunately we do not have a recommend material for this temperature range.
Date published: 2023-10-03
What is the lead material on the F series RTD's?
Hi Bruce J
Thank you for the inquiry.
Platinum Clad Nickel Wire Leads
Best regards
OMEGA
Date published: 2020-08-11
Does the RTD come with an adhesive?
Hi Clint, these RTD's do not come with an adhesive.
Date published: 2021-02-16