Welcome to our new website, found an issue or bug? Please report it here
FP7000
Fixed Length Inseration Paddlewheel Flow & Temperature Meter
Models In Stock
- Measures Both Flow and Temperature Simultaneously
- Very Economical
- Wide Chemical Compatibility
- High Level Pulse Output for Flow - No Amplifier Needed
FP7000
From
C$
520.00
Models In Stock
Product Overview
- Cable Length 8 ft
- Electrical Output Square Wave Pulse
- K-Factor 1 Hz/fps
- Material Construction Option N/A
- Materials, Wetted 316 Stainless Steel, FKM, Polypropylene, PVC
- Operating Pressure, Max 150 psi
- Operating Pressure, Min 0 psi
- Operating Pressure Note 0 to 26°C (32 to 80°F) up to 150 psig; max. pressure decreases 1.1 psig per each 0.56°C (1°F) above 27°C (80°F) for a maximum temperature of 93°C (200°F) at 18 psig maximum
- Operating Temperature, Max 150 °C
- Operating Temperature, Min 2 °C
- Output Detail pulse
- Pipe Size, Max 3 in
- Pipe Size, Min 0.75 in
- Pressure Drop, Max 1.1 psi
- Pressure Drop Note max pressure decreases 1.1 psig per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F) at 18 psig maximum
- Pressure Type Gauge
- Process Connection Size N/A
- Process Temperature, Max 93 °C
- Process Temperature, Min 0 °C
- Repeatability Error ±1%
- Supply Current 10 mA max
- Supply Power Note 5 to 18 Vdc @ 10 mA maximum
- Supply Voltage 5 to 18 Vdc
- Temperature Accuracy ± 1 °C
- Viscosity Range 5 cPs
- Volumetric Flow Rate, Max 460 GPM
- Volumetric Flow Rate, Min 2 GPM
Description
The OMEGAâ„¢ FP7001A paddlewheel flow and temperature sensor is ideal for accurate monitoring of typicalindustrial water flows, hard-to-handle corrosive aqueous solutions, and high purity fluids . The FP7001A utilizes a paddlewheel-like rotor whose motion is converted into a high-level square wave pulse output by an open collector Hall effect sensor. Pulse amplitudes from 5 to 18 V are possible, depending on input power. The FPW-15 120 Vac converter plugs directly into a wall socket and outputs a regulated 15 Vdc at 400 mA.The DPF700 Series panel meter supplies power for the flow sensor and provides rate indication, ortotalization and batch control (when ordered with the dual relay option). When ordered with theanalog output option, the DPF700 can be used to interface the FP7001A flow signal to such items as stripchart recorders, dataloggers, and computer interfaces.
The system consists of the flow sensor, an installing fitting, and the electronics. The PVC tee fittings are supplied with a PVC locking nut, and the galvanized iron tee fittings are supplied with a brass lockingnut to provide secure metal-to-metal mounting to the threaded brass insert.
The FP7001A is not compatible with FP-5300 or FMG-5300 Series installation fittings. When poweredby the FPW-5 five Vdc wall socket converter, the FP7001A has a TTL level pulse output which can beused with a variety of pulse input flow indicators, signal conditioners and controllers. It is not compatible with the FPM 5500/5740.
SPECIFICATIONS
Accuracy: ±2% of full scale
Repeatability: ±1% of full scale
Power: 5 to 18 Vdc @ 10 mA maximum
Wetted Materials: FP7001A sensor: polypropylene body, PVDF paddle, FKM O-ring, 316SS shaft. Galvanized iron tee includes brass insert and locking nut. PVC tee has PVC insert and locking nut.
Fluid Temperature/Pressure Range: Do not exceed the maximum ratings of your piping. Depending on the material of the fitting, the operating temperature/pressure may be limited by your piping and not by the sensor. For all PVC tee fittings, do not exceed 150 psig @ 27°C (80°F), 100 psig @ 38°C (100°F), 60 psig @ 49°C (120°F) 30 psig @ 60°C (140°F), due to the insert in the tee. FP7001A sensor: 0 to 26°C (32 to 80°F) up to 150 psig max. pressure decreases 1.1 psig per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F) at 18 psig max
Frequency Output: Nominal 1 Hz/fps amplitude of open collector pulse = Vdc input power
Cable Length: 2.4 m (8')
Weight: 0.2 kg (1/2 lb) FP7030 fitting: 4.3 kg (9.5 lb) FP7030-GI fitting: 2.8 kg (6.25 lb)
Max Viscosity: 5 cps
Temperature Sensor Specifications
Range: 2 to 150°C (36 to 302°F)
Accuracy: ±1°C
Output: 10 mV/°C
Power: 5 to 18 Vdc
Show Ratings & Reviews
Hi! we are interested in your Insertion Paddlewheel Flow Sensors, Article FP7001A. How long it takes the shipment? Do you delivery in México City?, Can we get an invoice? We need a Sensor that the cost included the shipment is aprox $265.00 US Dollar.
We can prepare a formal quote for the paddle wheel sensor in question and will need to advise on the pipe diameter you wish to install it. Also, the quote will have the estimated ship date from our NJ facility. It will best to email at flow@omega.com with additional information and can quote the sensor and the required fitting for your application. Thank you.
Date published: 2019-09-18