Welcome to our new website, found an issue or bug? Please report it here
PX2300
High Accuracy, Wet/Wet Differential Pressure Transmitters
Models In Stock
- 0.25% Accuracy
- NEMA-4/IP65 Rating
- Wet/Wet Corrosive Environments
- Ideal for Pressure Drop Across Filters
PX2300
From
C$
705.00
Models In Stock
Product Overview
- Accuracy ± 0.25 %
- Accuracy Class 0.1% to 0.25%
- Accuracy Note ± 0.25% RSS FS at constant temperature (includes linearity, repeatability and hysteresis)
- Additional Features 1 None
- Cavity Volume 4.4 CC positive port, 1.3 cc negative port
- Compatible Meters DP41-E, DP25B-E, DP-7700
- Compensated Temperature, Max 65 °C
- Compensated Temperature, Min -1 °C
- Electrical Connection Screw Terminal w/ 22.2 mm (0.875") conduit opening
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP65, NEMA Type 4
- Hysteresis 0.10% FS
- Line/Static Pressure 250 psig
- Linearity Error ± 0.20%
- Loop Resistance, Max 1000 Ω
- Operating Temperature, Max 80 °C
- Operating Temperature, Min -18 °C
- Output Signal Current
- Pressure Type Differential
- Process Connection Size 1/4 in
- Process Connection Type NPT Female
- Repeatability Error ± 0.05% FSO
- Response Time 50 ms
- Response Time Note 50 ms (water)
- Sensing Element Capacitive
- Supply Power Note 24 Vdc nominal Max: 30 + 0.004 x (loop resistance Ω) Vdc Min: 11 + 0.02 x (loop resistance Ω) Vdc
- Supply Voltage 24 Vdc
- Thermal Effect on Zero error, Max <± 0.02% FS/°F , <± 0.02% FS/°F
- Weight 410 g
OMEGA’s PX2300 Series high-output, low differential pressure transducers are compatible with most media, from dry air to corrosive liquids. All wetted parts are either stainless steel or elastomer seals. The electronics are housed in a NEMA 4 (IP65) enclosure. A high working pressure and high overpressure ratings ensure dependability in harsh industrial environments. These transducers are ideal for measuring pressure drop across filters and other process devices.
SPECIFICATIONS
Excitation: 24 Vdc nominal
Max: 30 + 0.004 x (loop resistance Ω) Vdc
Min: 11 + 0.02 x (loop resistance Ω) Vdc
Loop Resistance: 0 to 1000 Ω
Output: 4 to 20 mA (2-wire)
Accuracy: ± 0.25% RSS FS at constant temperature (includes linearity, repeatability and hysteresis)
Linearity: ± 0.20% FS
Hysteresis: 0.10% FS
Repeatability: ± 0.05% FS
Operating Temperature Range: -18 to 80°C (0 to 176°F)
Compensated Temperature Range: -1 to 65°C (30 to 149°F)
Thermal Zero Effect: <± 0.02% FS/°F
Thermal Span Effect: <± 0.02% FS/°F
Sensor: Capacitive
Maximum Line Pressure: 250 psig
Maximum Overpressure:
High Side: 1 to 5 psi = 20 x FS, 10 to 25 psi = 10 x FS, 50 psi = 5 x FS, 100 psi = 2.5 x FS
Low Side: 2.5 x FS (shift recoverable)
The zero will shift slightly when high differential pressure is applied. The shift may be as much as ± 10% FS with overpressure applied to the low port. (Other parameters will not shift.) The shift may be recovered by a positive overpressure or if the overpressure is always in one direction, the user may apply this pressure to pre-set the sensor. Subsequent overloads of less pressure will not cause any further shift.
Wetted Parts: Air and fluids compatible with 17-4 and 300 stainless steel, FKM, and silicone O-rings
Cavity Volume: 0.27/0.08' pos./neg. port
Case: NEMA 4 (IP65)
Pressure Port: ¼ NPT internal
Electrical Connection: Internal barrier strip with 22.2 mm (0.875') conduit opening
Response Time: 50 ms (water)
Weight: 410g (14.4 oz)
SPECIFICATIONS
Excitation: 24 Vdc nominal
Max: 30 + 0.004 x (loop resistance Ω) Vdc
Min: 11 + 0.02 x (loop resistance Ω) Vdc
Loop Resistance: 0 to 1000 Ω
Output: 4 to 20 mA (2-wire)
Accuracy: ± 0.25% RSS FS at constant temperature (includes linearity, repeatability and hysteresis)
Linearity: ± 0.20% FS
Hysteresis: 0.10% FS
Repeatability: ± 0.05% FS
Operating Temperature Range: -18 to 80°C (0 to 176°F)
Compensated Temperature Range: -1 to 65°C (30 to 149°F)
Thermal Zero Effect: <± 0.02% FS/°F
Thermal Span Effect: <± 0.02% FS/°F
Sensor: Capacitive
Maximum Line Pressure: 250 psig
Maximum Overpressure:
High Side: 1 to 5 psi = 20 x FS, 10 to 25 psi = 10 x FS, 50 psi = 5 x FS, 100 psi = 2.5 x FS
Low Side: 2.5 x FS (shift recoverable)
The zero will shift slightly when high differential pressure is applied. The shift may be as much as ± 10% FS with overpressure applied to the low port. (Other parameters will not shift.) The shift may be recovered by a positive overpressure or if the overpressure is always in one direction, the user may apply this pressure to pre-set the sensor. Subsequent overloads of less pressure will not cause any further shift.
Wetted Parts: Air and fluids compatible with 17-4 and 300 stainless steel, FKM, and silicone O-rings
Cavity Volume: 0.27/0.08' pos./neg. port
Case: NEMA 4 (IP65)
Pressure Port: ¼ NPT internal
Electrical Connection: Internal barrier strip with 22.2 mm (0.875') conduit opening
Response Time: 50 ms (water)
Weight: 410g (14.4 oz)
Show Ratings & Reviews
Rated 3 out of
5
by
Wendell from
PX2300
This item (PX2300) need to have a calibration certificate so that the user know the accuracy of the instrument.
Date published: 2016-12-19
Is it possible to order this customized to provide a 0-5VDC electrical output signal?
There is no 0 to 5VDC version of the transmitter available. You can use an external 250 ohm to convert the 4 to 20mA to a 1 to 5VDC
Date published: 2021-09-10
I need details around the mounting bracket for this component (PX2300)
Thank you for your inquiry, The PX2300 Series is supplied with a mounting bracket and two (2) 6-32 x 3/8 hex head screws. First attach bracket to mounting location using holes or band clamp notches available on large section of the bracket. Next, attach the transmitter to bracket by using the two 6-32 x 3/8” hex head screws and the two tapped holes located on the underside of the transmitter.
Date published: 2022-08-17
Hello, I just ordered PX2300-1DI and now I want to covert output current into the output pressure. With this regard, could you please share a data sheet/table/ formula for the current to pressure conversion?
Thank you for your inquire.
This is a linear output. You would take the output range and divide it by the pressure range to get the output per psi.
Date published: 2022-02-04
Hello, I want to use this transducer just as a regular gauge pressure transducer. I.e. I have one inlet for water which gauge pressure I want to measure. I'm going to leave the other inlet open to atmosphere. Will this work?
Yes it will. If you leave the low port open to the atmosphere the unit will act as a 0 to 1 PSIG range sensor
Date published: 2022-08-19
Does the PX2300-2DI come with a calibration certificate?
The PX2300 Series differential sensor do not normally come with any certification. We may be able to offer a NIST certification at an additional charge. You would need to contact our Sales Dept at sales@omega.com
Date published: 2021-04-15