Welcome to our new website, found an issue or bug? Please report it here
HOBO-MX1105
HOBO MX BLE 4-Channel Analog Datalogger
Models In Stock
- Four process current / voltage inputs for logging data from external sensors
- Bluetooth Low Energy (BLE) 100-foot communications
- 16-bit resolution for highly accurate measurements
- Stores 1.9 million measurements for longer deployments between offloads
HOBO-MX1105
From
C$
310.87
Models In Stock
Product Overview
- Accuracy Note Current Accuracy: ± 0.001 mA ± 0.2% of reading, Voltage Accuracy: 0 to 24 V: ± 1.0 mV ± 0.3% of reading, 0 to 2.5 V: ± 0.1 mV ± 0.1% of reading, 0 to 5 V: ± 0.2 mV ± 0.3% of reading, 0 to 10 V: ± 0.4 mV ± 0.3% of reading
- Approvals CE
- Battery life 1 yr, typical with reading interval of 1 min
- Battery Size and Type Alkaline AAA
- Configuration HOBOmobile® app Android, iOS, iPadOS
- Current Accuracy ± 0.001 mA
- Current Measurement Range 0 to 20.1 mA
- Current Resolution 0.3 µA
- Data Interface Bluetooth
- Display LCD
- Display Note LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
- Enclosure Ratings IP54
- Form factor Magnetic Surface or Insert the tie wraps
- Form Factor Note Use the four magnets on the back of the logger to mount it to a magnetic surface or insert the tie wraps through the mounting loops to attach it to other surfaces
- Height 1.15 in
- Input Type External
- Length 2.13 in
- Logger with Cable Type Current: SD-MA-420 or CABLE-4-20mA; Voltage: 0 to 24 V: SD-VOLT-24 or CABLE-ADAP24; 0 to 2.5 V: SD-VOLT-2.5 or CABLE-2.5-STEREO; 0 to 5 V: SD-VOLT-05 or CABLE-ADAP5; 0 to 10 V: SD-VOLT-10 or CABLE-ADAP10
- Logging Modes burst, Fixed interval
- Measurement Type Current, Voltage
- Memory 4 MB
- Memory Modes stop when full, Wrap when full
- Memory Note Approximately 4 to 15 minutes depending on the mobile device; may take longer the further the device is from the logger
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -20 °C
- Radio Power 1 mW
- Resistance Resolution Voltage: 384 µV, Current: 0.3 µA
- Resolution Note Current Resolution: 0.3 µA, Voltage Resolution: 0 to 24 V, 384 µV, 0 to 2.5 V: 40 µV, 0 to 5 V: 80 µV, 0 to 10 V: 160 µV
- Restart Mode Push button
- Samples,Max ~1.9M Samples, Interval Selectable 1 sec to 18hrs
- Start Modes At set date and time, Button Push, Immediate Start, Next Interval
- Stop Modes Button Push, When Memory is Full, At set date and time, At set Duration
- Supply Power Type Battery
- Time Accuracy ± 1 minute/month
- Transmission Range 30.5 m
- Voltage Accuracy ± 1.0 mV
- Voltage Measurement Range 0 to 2.5 V, 0 to 5.0 V. 0 to 10 V, 0 to 24 V
- Voltage Resolution 384 µV
- Weight 4.34 oz
- Width 4.44 in
The HOBO MX1105 multi-channel data logger, with four-channel inputs, measures and transmits data wirelessly from a variety of sensors to your mobile device via Bluetooth Low Energy (BLE) technology.
This self-contained wireless data logger lets you use your mobile device and Onset’s free HOBOconnect app to access data, at any time, over a 100-foot range via Bluetooth Low Energy (BLE) technology. You can configure the logger, read out data, view data in graphs, check the operational status of loggers, configure alarm notifications, and share data files – all with no dedicated equipment beyond a mobile device. And if used with the new MX Gateway, you can remotely access your data in Onset’s cloud-based HOBOlink® software. The MX1105 allows you to modernize, monitor, and log a variety of process and environmental monitoring sensors with analog process (4-20 mA, 0-10V, etc.) outputs.
On the Accessories tab you can find the required "Self-Describing" analog input cables to match the types of analog outputs on the sensors or other devices that you will be connecting to the 4 analog inputs.
You can download the HOBOconnect app here:
PDFs & Manuals
