Welcome to our new website, found an issue or bug? Please report it here
MX2203
HOBO MX TidbiT 400 Bluetooth Low Energy Waterproof Temperature Data Logger
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy Note | Temperature Sensor Accuracy: ± 0.25°C from -20° to 0°C, ± 0.2°C from 0° to 70°C |
| Additional Features 1 | Submersible, Waterproof to 120m |
| Approvals | CE |
| Battery Size and Type | CR2477, 3V Li-ion |
| Battery life | 3 yr, typical with reading interval of 1 min |
| Buoyancy | 0.11 oz Negative |
| Configuration | HOBOmobile® app Android, iOS |
| Data Interface | Bluetooth |
| Data Interface Note | Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0) |
| Enclosure Ratings | IP68 |
| Form Factor Note | You can deploy the logger by using the two mounting tabs. Insert two screws through the holes on the mounting tabs to affix the logger to a flat surface. Insert cable ties through the rectangular holes on both mounting tabs to attach the logger to a pipe or pole |
| Form factor | Mount on Flat Surface, Insert the tie wraps |
| Height | 1.41 in |
| Input Type | Internal |
| Length | 2.88 in |
| Logging Modes | burst, Fixed interval |
| Materials | Polypropylene, EPDM, Stainless Steel, TPV |
| Measurement Range Note | MX2203: -20° to 70°C (-4° to 158°F) in air; -20° to 50°C (-4° to 122°F) in water |
| Measurement Type | Temperature |
| Memory Note | Approximately 45 seconds; may take longer the farther the device is from the logger |
| Number of Measurements | 1 |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | -20 °C |
| Probe Type | Immersion Probe |
| Radio Power | 1 mW |
| Response Time | Temperature: 7 Min |
| Response Time Note | Temperature: 17 Minutes typical to 90% in air moving 1 m/s, unmounted, 7 Minutes typical to 90% in stirred water, unmounted_x000D_ |
| Safe Submersible Depth | 120 m |
| Samples,Max | ~96k Samples, Interval Selectable 1 sec to 18hrs |
| Supply Power Note | CR2477 3V lithium, user replaceable in MX2203, non-replaceable in MX2204 |
| Temperature Accuracy | ± 0.2 °C |
| Temperature Measurement, Max | 50 °C |
| Temperature Measurement, Min | -20 °C |
| Temperature Resolution | 0.01 °C |
| Temperature Sensor Drift | < 0.1°C Per Year |
| Time Accuracy | ± 1 minute/month |
| Transmission Range | 30.5 m |
| Water Detection | 100 µS/cm |
| Water Detection Note | Water conductivity level of 100 µS/cm or greater necessary for reliable detection of water. Deionized water or water below 100 µS/cm may not be detected. The water conductivity circuit may not reliably detect water that has frozen around the electrodes, i.e. below 0°C |
| Weight | 1.28 oz |
| Width | 1.75 in |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews