Welcome to our new website, found an issue or bug? Please report it here
DPI16-AL-DC
iSeries 1/32, 16, 1/8 DIN, Temperature/Process Meters with Alarm Outputs
Choose a Variant
Display Type
Supply Voltage
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$589.88 |
| 10-24 | C$560.39 |
| 25-49 | C$530.89 |
| 50-99 | C$501.40 |
| 100-499 | C$471.90 |
| 500+ | C$442.41 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.5 °C |
| Accuracy Note | ±0.5°C temperature; 0.03% rdg |
| Additional Features 1 | Programmable 3 Color Display |
| Alarm modes | Band, High/Low, Latch/Unlatch, Normally Open/Closed, Process/Deviation |
| Control Output | 2 SPDT Relay |
| Current Measurement Range | 0 to 20 mA |
| Display Size | 10.2 mm (0.40 in) |
| Display Type | 4 Digit Single LED |
| Display Type Note | None |
| Enclosure Ratings | IP65, NEMA Type 4X |
| Form factor | 1/16 DIN |
| Height | 48 mm |
| Impedance Input | 10 MΩ for 100 mV, 1 MΩ for 1 or 10 Vdc |
| Input Type | Themocouple, RTD, Current, Voltage |
| Number of Inputs | 1 |
| Operating Temperature, Max | 55 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | Alarm 1 and 2 Outputs Relay: SPDT, 250 Vac or 30 Vdc @ 3 A (resistive load) |
| RTD Type | 100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; α= 0.00385 or 0.00392 |
| Reading Rate | 3 samples/sec |
| Relative Humidity | 90% RH non-condensing |
| Sampling Rate | 3 Hz (3 updates/second) |
| Sensor/Transmitter Power | 24 Vdc @ 25 mA |
| Supply Power Note | 24 Vac, 12 to 36 Vdc; external power source must meet safety agency approvals |
| Supply Power Type | DC |
| Supply Voltage | 12 to 36 Vdc |
| Temperature Stability | RTD: 0.04°C/°C ;Thermocouple @ 25°C (77°F): 0.05°C/°C, cold junction compensation ;Process: 50 ppm/°C ; |
| Thermocouple Lead Resistance, Max | 100 Ω |
| Thermocouple Type | J, K, T, E, R, S, B, C, N, L (J DIN) |
| Voltage Measurement Range | 0 to 100 mV, 0 to 1 V, 0 to 10 Vdc |
| Width | 48 mm |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
bobb from
Good Product
Pleased with the product. Easy to program , preforms well.
Shipping is a little slow, and even though I ordered the product from Omega located in Connecticut, the product shipped from California, and had I known this I would have selected a different shipping method.
Date published: 2016-03-29
Rated 5 out of
5
by
jsulzer from
Cost effective and flexible!
Replaced a unit that was damaged due to lightning strike. First one worked for years until millions of volts decided to destroy it. GREAT tech support when the manual and menu was less than obvious.
Date published: 2016-05-23